PDA

View Full Version : making the floor shine?



cdba036
05-29-2007, 08:09 PM
I have a cole hydro that the floor has a lot of scratches and marks in it. I dont have the time this year to fix it up but atleast want to make it shine again. And i had to fix a few cracks in it that were getting into the wood, so what can i do to make it shine again? I figured wet sand it all then buff it but didnt want to make it worse so needed to ask.
Thanks!
Doug

Fiat48
05-29-2007, 08:50 PM
I used some Old English furniture polish. Worked pretty good.

AdrenelineOD
06-04-2007, 12:41 AM
I take them out with surfboard sanding resin. It sands to a polish way faster than a laminating resin and doesn`t clog the paper. The surface must be fully sanded to stick. PM me if you have questions Brad,

EXTREMEBOATS
06-06-2007, 10:36 PM
Once you have prepted the floor, several coats or resin and or urathane clear brings them back. Always wax your resin... It will make a show room shine easier.
If I can help just call.
Mike Cline
407-679-6179 est