MK IV BBC 4 Bolt block

[Moneypitt]

MK IV BBC 4 bolt mains w/factory bolts w/ stand offs for tray, fresh 4.315 hone,Clevite 77 std main bearings w/ 5 minutes run time, Cam brgs and brass freeze plugs, Milodon copper head gaskets, (re usable). Dual o ring grooves in deck, with new wire. This block was honed for +.060 pistons.$250....
Polished Aluminum oval port dual plane intake, $125. BBC T/cover w/ neovane pump (new impeller) and SS plumbing, $75. Hilborn style single carb scoop, $100. SBC Enderle T/cover for injection, new..$80. GM 7/16ths/ 6.135 dot rods, polished, $175. All prices are + shipping, Call 805 300 0012 (cel) for details. Some delivery possible......Ray

[78Eliminator]

Somebody better jump on the block or I will. That is a SMOKING deal on a block.

[FASTRAT]

MK IV BBC 4 bolt mains w/factory bolts w/ stand offs for tray, fresh 4.315 hone,Clevite 77 std main bearings w/ 5 minutes run time, Cam brgs and brass freeze plugs, Milodon copper head gaskets, (re usable). Dual o ring grooves in deck, with new wire. This block was honed for +.060 pistons.$250......Ray
Ray...
thnx a bunch :) for delivering the block...i really appreciate it...also...thnx for the info...i'll be talking to ya when i get ready to build the mtr...good luck at Bakersfield :)
Ron

[GofastRacer]

Hey Ray, what kind of oval port intake you got???.. If you still have it that is!..

[Moneypitt]

Art, all I know is oval port dual plane high rise type. Any name has been polished off. It does have the 4 water outlets at the corners if thats any help. Pretty nice polish job, but could use some never dull and elbow grease.
PS: As mentioned above, Ron bought the block this afternoon. Boy was he shocked to find out that I was in BHC and so was the block, and BTW, talk about "out in the boonies", Ron's place is to the boonies, and then another 8 miles or so!!!.......

[GofastRacer]

Art, all I know is oval port dual plane high rise type. Any name has been polished off. It does have the 4 water outlets at the corners if thats any help. Pretty nice polish job, but could use some never dull and elbow grease.
PS: As mentioned above, Ron bought the block this afternoon. Boy was he shocked to find out that I was in BHC and so was the block, and BTW, talk about "out in the boonies", Ron's place is to the boonies, and then another 8 miles or so!!!.......
Check PM's!..