Spam 19 Foot Hallett Bubble Deck

[Schiada Time]

Well the time has come to sell my baby. Upgrading to something bigger. The boat is a '77 19-foot Hallett Bubble Deck jet with a bored 460 Ford. Most on the boards know this boat from attending CBBB every year and its appearance in Truckin' magazines Water Toys section.
Gel-original white with candy red metal flake-in great shape
interior-pearl white tuck 'n' roll with red piping, false floor with two year old red marine carpet, Rex Marine gauges (white face with white bezels), white four spoke steering wheel with anodized red hub.
Bilge has been sprayed red and transoms is in great shape
completely restored trailer with stainless fenders, Weld aluminum wheels, Toyo low profile tires, white paint, red pinstriping, diamond plated steps, LED lighting
Jack McClure MPD prepped Berkeley 12 JC converted to a 12 JG with droop snoot, manual place diverter (floor mount), MPD loader and back cut shoe, Ride plate, AB blend impeller. Pump was completely gone through two seasons ago.
Bottom was blueprinted by Jeff Bennett
I will be pulling my 501 ci Ford out and putting in the new boat. The 460 from that boat will go in with my Bassett jet hot coated headers and a single carb and single scoop.
This boat is in excellent shape and turn key. I can e-mail pics to those interested and ran 78 MPH and GPS with my 501 (533 hp ) Ford in it.
the asking price with the other power is $7,500
(714) 276-5268

[LAFD]

would this be the boat???
http://www.classicboatbeachbash.com/2005pics/magicgallery/DSCN7750.jpg

[Schiada Time]

That's my baby! It will have another Ford Big Block in it as I am keeping that mill for the new boat.

[YeLLowBoaT]

What are the specs for the old 460 you are putting in????
I know some 1 looking for a ford powered jet boat....

[ROZ]

do you have any more pictures?

[LAFD]

saw this boat at the last cbbb absolutly awesome. very very clean and looks sweet. should sell quick.

[Schiada Time]

yellowboat- I will know more on the specs of the motor gojng in this weekend when I pick up the other boat. I do know it is around a 500 horse BBF and was recently freshened. I can fill you in on more details once I consult with the current owner and get the specs. It is a single carb naturally apsirated deal with I believe a dual plane manifold.
Roz- I do have more pics and will try to get them up soon. i don't know much about posting pics so it may take some time or if you provide an e-mail i could just send them to you.
travis

[GUGS102]

I saw this boat at CBBB, nice rig. I have a 78 Hallett jet sprint which is very close to this, I've never ridden in a jet boat which hung corners like the Hallett and with the full stringers, it rides very solid, someone will be happy with the boat.
Gugs

[Schiada Time]

It has been an unbelievable boat and is my first so it is hard to let it go but onto a cruiser I go. I restored this boat and have alot of time and money in it. Somebody is gonna score! solid through chop and extra clean.

[dmontzsta]

This boat is SUPER CLEAN!
Whats next dude? spill it. :)

[Schiada Time]

Dmonzta- Spectra 20 Jet. Should be perfect for family boating on lake Mead and running the river. found the one and probably picking her up this weekend.

[Schiada Time]

To the Top

[Schiada Time]

Back to the top. this shouldn't be floating around on page 2. Its a HALLETT

[LAFD]

Dmonzta- Spectra 20 Jet. Should be perfect for family boating on lake Mead and running the river. found the one and probably picking her up this weekend.
have any pics of the new boat???

[Schiada Time]

Not yet but I should this weekend.

[Schiada Time]

Back up top.
Trav

[garret]

Here is another pic of Travis's boat.
http://www.***boat.com/image_center/data/520/2780Blythe_003.jpg
That thing is super clean and very well taken care of!!!
Good luck on your sell!

[Coleitis22]

That's my baby! It will have another Ford Big Block in it as I am keeping that mill for the new boat.
Sweet Ride.............. :) :)

[victorfb]

TTT
didnt i see that boat in a mag somewere? :cool:
its a nice ride man. clean boat and well taken care of.

[Focker]

would this be the boat???
http://www.classicboatbeachbash.com/2005pics/magicgallery/DSCN7750.jpg
HOW CAN I GET ONE OF THOSE COVERS ON THAT CARB HEAD OR WHATEVER THE FOCK THEY CALL IT

[Focker]

Ps
Bitchen Focken Boat U Got

[Schiada Time]

Thanks for all the cool comments guys. She will be missed but it is definitely time for something bigger. One of the cleanest original gelcoat Hallett's out there.

[Schiada Time]

To the top.

[Beautiful Noise]

One of the cleanest original gelcoat Hallett's out there.
I'll say it is..........What a great buy for somebody,Travis I'm sure its going to be hard to let it go BUT life goes on to Bigger and Better things :)

[dmontzsta]

two pages back? BUMP! Here is another pic I found.
http://www.dmontzsta.com/MiscStuff/MiscPics/1676HotHallet_Travis.JPG

[TMoney]

I think I found the right boat. Waiting to hear from current owner. If this boat works out I'll be ready to go. The Spectra I was looking at fell through.

[dmontzsta]

I think I found the right boat. Waiting to hear from current owner. If this boat works out I'll be ready to go. The Spectra I was looking at fell through.
Is that a new name again Travis? lol. damn dude.
Go to user cp and change your password to something you will remember. :D

[Schiada Time]

Boat is now coming with current power but NOT for $7,500. I found a boat that is set-up for a Chevy so my 501 c.i. BBF will go with the Hallett.
Motor:
460 ford block stroked to 501 c.i.
.030 over
Edelbrock 75 CC combustion chamber Aluminum Heads
Eagle Stroker Crank
Eagle H-beam Rods
Lunati lifters
Comp Cams 3/8 pushrods
SRP 28CC inverted dome pistons
Lunati camshaft-hydraulic flat tappett 560 lift 280 duration
Lunati roller tip rockers
Milodon 12 qt. jet boat pan
Mellings pump and pickup
Holley black fuel pump
Weiand polished tunnel ram with two 4150 style Holley double pumper 600 carbs
Linkage all setup and works great
polished Dooley tunnel ram scoop
Bassett O/T jet hot coated short collector headers
polished bell housing
MSD Pro Billet distributor
MSD 6M2 ignition box
MSD Blaster Coil
chrome Ford Racing valve covers
$10,000 obo with this power
Travis
714-276-5268

[dmontzsta]

Travis,
What is the new boat?

[Schiada Time]

I can't say. Not until it is hooked to my truck and I am heading down the freeway. I can say that it is extremely cool and will be every bit as clean as the Hallett when I am done with it. as soon as it is in my posession you'll know.
trav

[dmontzsta]

I can't say. Not until it is hooked to my truck and I am heading down the freeway. I can say that it is extremely cool and will be every bit as clean as the Hallett when I am done with it. as soon as it is in my posession you'll know.
trav
That is totally understandable, I was the same with mine. :)
Do tell though as soon as you can, we are waiting on pins and needles. :D

[Schiada Time]

To the Top. this Hallett is as turn key as they come.

[Cs19]

thats a steal. to build something comparable would nickle dime you to death.
CS

[atxwrangler]

sweet boat!

[Schiada Time]

This boat is ready for summer, 100% turn key, and moves out extremely well.

[Schiada Time]

Back to the top. Going to pick it up this weekend from my storage in bullhead if anyone is interested in looking.

[Beautiful Noise]

Bump

[Schiada Time]

to the top

[novaguy]

That boat is beautiful!

[Ntwotrance]

damn, for those of you that haven't seen this boat up close, it is super clean. I've got some pics of it that I'll try to hunt down and post. This boat is worth the money.

[Shawny Mac]

Apparently the boat has been sold.... Damn, I had money in hand too... Oh well , maybe next time

[dmontzsta]

really? Congrats on the sell Travis.
enjoy the new V-Drive cruiser. :)

[Shawny Mac]

Yeah, I was supposed to go on a "rip " this morning in Elsinore. But Travis called and told me the boat had been sold

[MudPumper]

Damn, I've seen this boat in person. Somebody got a nice boat for sure.

[Shawny Mac]

Thats what I keep hearing, but I didnt get a chance to see it before it sold. Probably better that way... If I had seen it I probably would have wanted it more than I already do

[Schiada Time]

Boat was sold last night to Mudpumper Mike. I could tell he really wanted the boat and is going to take excellent care of it. I have a lot of great memories of restoring that boat with the help of my Dad, Hackjob and Flatbroke and a lot of other great friends. It really turned into a nice piece. I must admit it was hard when Mike hooked her up and towed her away last night but atleast I know it went to a good home. Take care of it Mike as I could not bare to see all the hardwork and time I put into that sucker go down the tubes. The Schiada is sitting in my friend Brandon's backyard and i can't wait to get rolling on that sucker. I've wanted a Schiada for a long time and finally got one. I guess thats what dreams are all about. I finally got the boat of my dreams and I can't wait to get it on the water. I wish Mudpumper and his wife many great summers in the Hallett.
Travis

[atxwrangler]

good luck with the schiada! post many progress pics!