Offroad HID deal, the prices are falling! Under $100!!!

[Magic34]

Check this out. I got 2 for the Rhino so I can angle them way out wide. The ring matches my colors, added bonus! :D
7” HID light with internal ballast. Retail $119.95 at Checker (Kragen) Auto (CSK)stores. Each store only has 2 so call before heading down there.
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=CSM&MfrPartNumber=99000CSK
Fill out this survey and get another 25% off. For receipt info, just make up some numbers, it all works.
http://www.partsamerica.com/surveystart.aspx?surveyKey=4H7R

[Garrddogg]

Check this out. I got 2 for the Rhino so I can angle them way out wide. The ring matches my colors, added bonus! :D
7” HID light with internal ballast. Retail $119.95 at Checker (Kragen) Auto (CSK)stores. Each store only has 2 so call before heading down there.
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=CSM&MfrPartNumber=99000CSK
Fill out this survey and get another 25% off. For receipt info, just make up some numbers, it all works.
http://www.partsamerica.com/surveystart.aspx?surveyKey=4H7R
Why not go with the small led?:idea:

[Cole Trickle]

Why not go with the small led?:idea:
$$$$$$$$$$$$:D
Did you wire them up yet or are you gonna wait and fly in a HID specialist to complete the task?;)
Are they bright,Durable,etc.....
What are your thoughts/ reviews after getting thyem in your hand?

[Magic34]

$$$$$$$$$$$$:D
Did you wire them up yet or are you gonna wait and fly in a HID specialist to complete the task?;)
Are they bright,Durable,etc.....
What are your thoughts/ reviews after getting thyem in your hand?
Picking them up today. With that coupn it is 25% off making each light only $89.
I have the PIAA lights up front that were $250 for the pair and I cant wait to put the HIDs on to do the job of the damn PIAA lights.
Most, if not all of the HID lights are now made in China and they were just making a killing. I would think that the quality is close to some of the well known brands because in all reality, the same people are making them. Someone finally rolled the dice on wh0ring them out. Good for us. :)

[caroftheweek]

$$$$$$$$$$$$:D
Did you wire them up yet or are you gonna wait and fly in a HID specialist to complete the task?;)
Are they bright,Durable,etc.....
What are your thoughts/ reviews after getting thyem in your hand?
Hey whats with all the questions Mr. glass 1/2 empty?
Just go buy'em. It they break, take them back.:D

[hkunz]

Do they have the kind that don't get smashed when you roll the Jeep? That's the model I'm still waiting for:D

[Racey]

Harbor freight has 9" hids for $90

[Magic34]

Harbor freight has 9" hids for $90
You are right, and chrome!
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95059

[hkunz]

[QUOTE=Magic34;2929767]Picking them up today. With that coupn it is 25% off making each light only $89.
QUOTE]
Ninety bucks EACH? I got the coupon, worked as you said, but I missed the "each" on the first reading.

[Outnumbered]

Hey quit spending that money for a minute and ship me out some DWG, my truck is looking sad:D
.
.
.
.
ps, Hope the kids are feeling better and the new washer is not stinky:D

[Big Kahunaa]

i just went a got a set they a cool i put them up against my rigged up hids bult with benz stuff the rigged ones are brighter buth the cheker are eazy

[INSman]

You are right, and chrome!
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95059
These need a ballast ?!?

[INSman]

Check this out. I got 2 for the Rhino so I can angle them way out wide. The ring matches my colors, added bonus! :D
7” HID light with internal ballast. Retail $119.95 at Checker (Kragen) Auto (CSK)stores. Each store only has 2 so call before heading down there.
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=CSM&MfrPartNumber=99000CSK
Fill out this survey and get another 25% off. For receipt info, just make up some numbers, it all works.
http://www.partsamerica.com/surveystart.aspx?surveyKey=4H7R
These mount ez to the TCB front bumper ?!? :idea:

[Magic34]

These mount ez to the TCB front bumper ?!? :idea:
I think they may be 1/2 inch too big in diameter. :( Putting mine on the roll cage just above the hood.

[Magic34]

Hey quit spending that money for a minute and ship me out some DWG, my truck is looking sad:D
.
.
.
.
ps, Hope the kids are feeling better and the new washer is not stinky:D
Thanks.
Another doctor appt at 2:20 today for the little guy. I am boxing your stuff up now.

[Brewzed]

I hope they work out for you, but they look like putting Pep Boy parts on a MBZ. You have to much money in that thing to go cheap. I could see those lights on a Commando:D

[Outnumbered]

Thanks.
Another doctor appt at 2:20 today for the little guy. I am boxing your stuff up now.
I'm just bustin' your balls. It is supposed to rain this weekend anyway.
There is some nasty stuff going around. My kid has been out of school for 3 days now.

[socalmofo]

I installed some of these on my Rhino. BRIGHT! They are a driving pattern but put out a very wide pattern. GREAT DEAL! $199 OTD for 2 lights!

[Riverkid]

the Holder LED HID lights?

[2Driver]

Any cheaper and you can mount them to your new washer and do laundry at night. :D
Hope the kids doing better.

[phebus]

Any cheaper and you can mount them to your new washer and do laundry at night. :D
Hope the kids doing better.
LOL :D

[Outnumbered]

Any cheaper and you can mount them to your new washer and do laundry at night. :D
Hope the kids doing better.
Good one!:D

[Magic34]

Any cheaper and you can mount them to your new washer and do laundry at night. :D
Hope the kids doing better.
LMAO. Nice. :D

[Magic34]

the Holder LED HID lights?
I have the 40" bar up top, but I ordered my light bar with (4) 10" spot patterns (4x10" makes the 40 bar) so my flood pattern sucks. I am going to angle these off at 45 degrees and should have enough light for anything out there. The LED light bar is the best way to go in my opinion.
With the spots we tried duning at night at the huge bowls at Buttercup and when you are in there and try to look left or right, it feels like you are going to fall off of the edge of the world.
I wanted to go really wide with a light spread and I could do it with 10" LED lights, but it would look funny have 2 10" bars angled out like a mini snow plow.

[Magic34]

I'm just bustin' your balls. It is supposed to rain this weekend anyway.
There is some nasty stuff going around. My kid has been out of school for 3 days now.
The box is on my desk staring me in the face. I'll ship it tomorrow. Missed the drop today because of the doc. I threw a little extra in there for the wait.

[hkunz]

Did you pick up the lights? How do they look? Is there an external ballast?

[mbrown2]

Did you pick up the lights? How do they look? Is there an external ballast?
In the 1st post he says internal ballast..

[socalmofo]

They are internal ballast!

[HowardFlat]

These need a ballast ?!?
My friends got a set for his rhino and they are internal balast and work great. I want to get one for my street legal dirtbike!

[Riverkid]

I held one in my hand today. I'm going to go with "no comment."
Quality? :D

[Riverkid]

I have Hella's. Those Holder lights would make for some nice cornering lights though... :)

[Riverkid]

We use pretty much only VisionX, but we've been putting a lot of Soltek Fuego's on Rhinos.
I have Fuego's on my trailer hitch... :D

[Magic34]

Entirely plastic. Except for the bolt, which is believe was 100% cheaponium.
Ha, thanks SB. I hadn't seen them yet, just ordered them. I couldn't make it to pick them up today. Now i will lower my expectations and hopefully be presently surprised. :)
My PIAA are worthless up front and I refuse to spend anymore on my Rhino, but these seemed cheap enough for what they are. I figured for the amount of time I am actually running the thing now, cheap is better.
If they are ugly, I will paint them rattle can chrome all custom like. :D
I will say I wouldn't run these on a bad a$$ sand car, but for the Rhino or other SxS I think they might be a good ticket for thoes who want to spend less than $200 and get some better lights. Time will tell. :)

[Havasu1986]

Read post #30. :eek: :D

[Magic34]

Read post #30. :eek: :D
For a $90 light, they are actually nice. Just very big and on my Rhino is just does seem to flow right. I did do a direct wire to the battery and they only hum for a second and the light seems good. Not as bight as the LED bar, but very good for the price point for sure. I would recommend them unless all your stuff is chrome or polished. :)
Mount these on the front of a stock bumper and it is money very well spent.

[djunkie]

For a $90 light, they are actually nice. Just very big and on my Rhino is just does seem to flow right.
Mount these on the front of a stock bumper and it is money very well spent.
Ok then I'll give ya $60 for them. :D :D

[Magic34]

Ok then I'll give ya $60 for them. :D :D
If you seriously want them, I can bring them to Havasu over New Years. Not at your price though. My price. :)

[djunkie]

If you seriously want them, I can bring them to Havasu over New Years. Not at your price though. My price. :)
I need more lights like i need a hole in my head. But for $70 I'll take them. :D

[phebus]

djunkie, did you ever get new seats? If so, what kind?

[djunkie]

djunkie, did you ever get new seats? If so, what kind?
Nope. Still pondering what I want. Buying christmas presents (and an engagement ring) has used up most of my money though so I may not be getting any for a month or so.