Jungle Boy
06-18-2002, 06:04 AM
I got the new engine yesterday, after 5 hrs of tuning on the motor builders dyno. When we first started this project, I asked Louie at AMS to build me a engine that would be used for hard play and limited racing that would burn pumpgas. He started with a Dart Little M block, Scat crank, Corrilo rods, Wiesco pistons (10:0-1), Reed hydrualic roller cam, Edelbrock 2925 intake, Holly AED 750 carb, 9 qt Dan Olsen pan. The motor ran great and has very good torque.
RPM - Torque - CHP
2900 - 467.7 - 258.2
3200 - 474.2 - 288.9
3500 - 501.7 - 334.3
3800 - 514.5 - 372.3
4100 - 527.5 - 411.8
4400 - 535.4 - 448.6
4700 - 530.4 - 474.6
4900 - 520.2 - 485.3
5100 - 505.4 - 493.7
5300 - 492.0 - 495.5
5500 - 478.9 - 499.7
We didn't run it past 5500 RPM, so I never seen the 500 mark. I'll be wrenching most of the day to get it in the water tonight. This is going to make a really excellent motor. JB
RPM - Torque - CHP
2900 - 467.7 - 258.2
3200 - 474.2 - 288.9
3500 - 501.7 - 334.3
3800 - 514.5 - 372.3
4100 - 527.5 - 411.8
4400 - 535.4 - 448.6
4700 - 530.4 - 474.6
4900 - 520.2 - 485.3
5100 - 505.4 - 493.7
5300 - 492.0 - 495.5
5500 - 478.9 - 499.7
We didn't run it past 5500 RPM, so I never seen the 500 mark. I'll be wrenching most of the day to get it in the water tonight. This is going to make a really excellent motor. JB