MY NEW BABY

[Kilrtoy]

http://www.***boat.com/image_center/data/500/111DSCF00821-med.JPG

[Kilrtoy]

http://www.***boat.com/image_center/data/500/111DSCF0083-med.JPG

[Kilrtoy]

http://www.***boat.com/image_center/data/500/111DSCF00851-med.JPG

[Kilrtoy]

http://www.***boat.com/image_center/data/500/111DSCF0084-med.JPG

[Windy]

Bad ASS...when you bringen that thing over???

[Kilrtoy]

Thanks Windy,
Yvonne has to get used to it before we go to far on it....... :D

[vdrivenman]

Beautiful machine KILRTOY. see the I/H logo what model is it ?

[JetBoatRich]

VERY NICE
:D eek! :D
did you have it custom built?
Who did the work, looks like they did a great job

[Jungle Boy]

"before WE go any where"....There's room for 2 on that? eek! Cool looking bike. :cool: Ride safe.

[stroke-me]

Badd ass scooter! Who is the builder?

[BLUBYU]

Nice looking custom, but where is Mrs. Kilrtoy supposed to ride?

[PussyPusher]

Hey I just saw you at my building. You had pictures taken for your insurance and loan. Good looking bike. McCloskey cycles is the way to go, I have to root for the home team since the owner of McCloskey cycle's is my boss's brother. I was just in his shop checkin that bike out on Friday!! Good times! Enjoy!

[Kilrtoy]

It's a 2003 American Iron Horse. The model is Texas Chopper. Its looks blue but it is an awesome purple. The color is House of Kolor Bad Ass Burple. I have a suction seat for the Mrs. .
Yeah I was over their for the Ins. They needed pics. So far so good, just a few minor kinks. Mikuni carbs the float keeps sticking and flooding the engine........

[SCUBA STEVE]

hey Miguel, that doesnt look like a 25' Shockwave. Does it at least float, and have room for an ice chest? J/K. :D
Looks sweet, Congrats! :cool:
When do the we get to see pictures of Mrs Kilrtoy, modeling with the bike? devil

[HOOTER SLED-]

Kilrtoy:
http://www.***boat.com/image_center/data/500/111DSCF00821-med.JPG Sweet ride Kilr. Kinda funny with that 10 MPH sign behind it. Been thinkin about a chopper myself for a next toy. How's the ride for the Mrs. on that thing? Any problems with the rear fender clearing with the two of you on it? What's the price range for a custom like that? What do you think about Big Bear Choppers? I hear you can buy a complete set-up for around $18,000. A little more for them to assemble. But I wouldn't mind putting it together myself.
HOOTER

[HOOTER SLED-]

When do the we get to see pictures of Mrs Kilrtoy, modeling with the bike? devil [/QB][/QUOTE]
I second that motion Scuba. :D :D :D :D

[PipesClean]

Very Nice. Looks similar to a Big Bear Venom

[Boozer]

HOOTER SLED-:
Kilrtoy:
http://www.***boat.com/image_center/data/500/111DSCF00821-med.JPG Sweet ride Kilr. Kinda funny with that 10 MPH sign behind it. Been thinkin about a chopper myself for a next toy. How's the ride for the Mrs. on that thing? Any problems with the rear fender clearing with the two of you on it? What's the price range for a custom like that? What do you think about Big Bear Choppers? I hear you can buy a complete set-up for around $18,000. A little more for them to assemble. But I wouldn't mind putting it together myself.
HOOTER $18,000 is pretty darn cheap for a custom Chopper. Is that not painted? Is the frame pre drilled to mount everything? If not assembly is going to be a lot more work then you think.
I have started buying pieces to build custom choppers for my father and I. They are turning out to be a lot more expensive then I had originally thought. S&S engines are like $8,000 each jawdrop and doesn't include the trans.
I am interested to know what kind of motor, wheels, and trans they use on that $18,000 chopper.

[hd&boatrider]

Kilrtoy:
http://www.***boat.com/image_center/data/500/111DSCF00821-med.JPG Nice bike Kilrtoy. As you can see I ride Harleys. The one in my avatar I am selling and I also have a 200 Heirtage Softail. The HS is in the shop getting ape hangers and I recently added Hooker pipes with no baffles. Louder than shit :) You want to go to Sturgis with Nodigg and I (riding all the way) or are you planning on being a poser? jk Maybe some time we can get together and ride somewhere. Let me know.

[MRS FLYIN VEE]

Hey congrats on the beauty. It is awesom. Love the paint job. :cool:

[Ms. AquaBoogie1]

That is a sweet ride Kilrtoy.......Can't wait to get mine!!!!

[HOOTER SLED-]

Boozer
HOOTER [/qb]$18,000 is pretty darn cheap for a custom Chopper. Is that not painted? Is the frame pre drilled to mount everything? If not assembly is going to be a lot more work then you think.
I have started buying pieces to build custom choppers for my father and I. They are turning out to be a lot more expensive then I had originally thought. S&S engines are like $8,000 each jawdrop and doesn't include the trans.
I am interested to know what kind of motor, wheels, and trans they use on that $18,000 chopper. [/QB][/QUOTE]
Boozer,
I was kinda surprised too when I heard that. But a good friend of mine works with a guy who bought a Big Bear Chopper for that amount. He said it was COMPLETE. Not a thing needed(he assembled it). Don't know what the set-up was. I'd imagine it wasn't a Briggs & Stratton though. :D :D I'll have too find out.
HOOTER

[78Eliminator]

Kilrtoy:
It's a 2003 American Iron Horse. The model is Texas Chopper. Its looks blue but it is an awesome purple. The color is House of Kolor Bad Ass Burple. I have a suction seat for the Mrs. .
Yeah I was over their for the Ins. They needed pics. So far so good, just a few minor kinks. Mikuni carbs the float keeps sticking and flooding the engine........ Send those carbs to TPC!!!!!

[TrojanDan]

Congrats Kilrtoy. Nice looking Chopper!

[superdave013]

HOOTER SLED-:
Boozer
HOOTER $18,000 is pretty darn cheap for a custom Chopper. Is that not painted? Is the frame pre drilled to mount everything? If not assembly is going to be a lot more work then you think.
I have started buying pieces to build custom choppers for my father and I. They are turning out to be a lot more expensive then I had originally thought. S&S engines are like $8,000 each jawdrop and doesn't include the trans.
I am interested to know what kind of motor, wheels, and trans they use on that $18,000 chopper. [/QB]Boozer,
I was kinda surprised too when I heard that. But a good friend of mine works with a guy who bought a Big Bear Chopper for that amount. He said it was COMPLETE. Not a thing needed(he assembled it). Don't know what the set-up was. I'd imagine it wasn't a Briggs & Stratton though. :D :D I'll have too find out.
HOOTER [/QB][/QUOTE]
I'll be up in Big Bear this weekend. I can stop by their shop and get some info for you guys if you want.
I go past that place all the time and wouldn't mind stopping in.
[ July 15, 2003, 12:35 PM: Message edited by: superdave013 ]

[WetWillie]

VERY nice bike!! Can you take a picture of your wifee on it? That would make it complete!
WW wink

[Mrs Sandbar Junkie]

HOOTER SLED-:
When do the we get to see pictures of Mrs Kilrtoy, modeling with the bike? devil I second that motion Scuba. :D :D :D :D [/QB][/QUOTE]
I third that motion...
Congratulations!!! Can't wait to see it!!! http://skins.hotbar.com/skins/mailskins/em/062802/062802moto_prv.gif
[ July 15, 2003, 01:13 PM: Message edited by: Mrs Sandbar Junkie ]

[Sandbar Junkies]

SCUBA STEVE:
hey Miguel, that doesnt look like a 25' Shockwave. Does it at least float, and have room for an ice chest? J/K. :D
Looks sweet, Congrats! :cool:
When do the we get to see pictures of Mrs Kilrtoy, modeling with the bike? devil I think some asshole ruined the dream about a Shockwave after he got to ride in a CAT. :D And by the way Miguel if you need someone to take the pics of the wife and bike let me know, that what friends are for. :D Oh by the way very nice bike.
[ July 15, 2003, 02:50 PM: Message edited by: Sandbar Junkies ]

[1stepcloser]

That is freakin' sick!
Very nice paint work.

[6 balls]

Very nice Kilrtoy!
I've been looking into the kits, Big Bear Choppers "Reaper" kit runs $19,499 complete kit without assembly or paint.
Specs from their site:
OPTION 1 POWER PLANT
Brand: RevTech® Show Polished
Displacement: 100 Inch
Horsepower: 100 HP
Warranty: 2-Year/20,000 Mile
Carburetor: Mikuni HSR42 Smoothbore
Air Cleaner: RevTech Hi-Flow Assembly
Oil Pump: High-Volume
Wiring Harness: Wire-Plus®
Charging System: Spyke® Super Duty® 32 Amp
Coil: 80,000 Volt Mini
Spark Plugs: Autolite®
Plug Wires: Accel®
Battery: SVR®
Starter: Spyke
Pipes: Santee® Shotgun Straight
Ignition: RevTech Digital Multi-Spark
OPTION 2 POWER PLANT
no added cost
Brand: S&S®
Displacement: 96 Inch
Horsepower: 102 HP
Warranty: 1-Year
Carburetor: S&S®
Air Cleaner: S&S®
Oil Pump: S&S®
Wiring Harness: Wire-Plus®
Charging System: Spyke® Super Duty® 32 Amp
Coil: 80,000 Volt Mini
Spark Plugs: Autolite®
Plug Wires: Accel®
Battery: SVR®
Starter: Spyke
Pipes: Santee® Shotgun Straight
Ignition: Crane® HI-4
TRANSMISSION
Transmission: RevTech 6 Speed Overdrive Show Polished
Primary Belt Drive: 3” Open BDL® Show Polished
Rear Belt: 132 Tooth 1/18'
FRAME
Brand: Reaper Chopper
Frame Tubing: DOM Seamless
Special: BBC Laser Cut Web in the Neck
Warranty: Lifetime
Downtube Stretch: 6”
Backbone Stretch: 3”
Rake: 40°
SHEET METAL
Tank: BBC 26”, 14 Gauge Steel with Flush Mount Gas Cap
Rear Fender: BBC 12 Gauge Steel
Front Fender: BBC 12 Gauge Steel
Oil Tank: BBC 14 Gauge Steel with Laser Cut Web
Warranty: Lifetime
SUSPENSION
Forks: Pro-One®
Extension: 10" Over
Rear Shocks: CCI®
WHEELS/TIRES/BRAKES
Wheels: Pro-One ‘Storm’ Polished Billet Aluminum
Front: 21” x 2.125
Rear: 18” x 8.5
Tires: Avon®
Front: 2.125” Avon Venom®
Rear: 250 Avon Venom
Brakes: P.M.® 4 Piston Caliper
ACCESSORIES
Bars: CCI Drag
Risers: 6” CCI
Hand Controls: CCI
Grips: H-D
Forward Controls: V-Thunder® Chromed
Throttle: CCI
Lights: CCI
Signals: CCI
Mirrors: CCI
Seat: High End® with BBC Embroidered Logo
Kickstand: White Bros®
Cables: Goodridge® Stainless Steel Clear Coated

[hd&boatrider]

6 balls:
Very nice Kilrtoy!
I've been looking into the kits, Big Bear Choppers "Reaper" kit runs $19,499 complete kit without assembly or paint.
Specs from their site:
OPTION 1 POWER PLANT
Brand: RevTech® Show Polished
Displacement: 100 Inch
Horsepower: 100 HP
Warranty: 2-Year/20,000 Mile
Carburetor: Mikuni HSR42 Smoothbore
Air Cleaner: RevTech Hi-Flow Assembly
Oil Pump: High-Volume
Wiring Harness: Wire-Plus®
Charging System: Spyke® Super Duty® 32 Amp
Coil: 80,000 Volt Mini
Spark Plugs: Autolite®
Plug Wires: Accel®
Battery: SVR®
Starter: Spyke
Pipes: Santee® Shotgun Straight
Ignition: RevTech Digital Multi-Spark
OPTION 2 POWER PLANT
no added cost
Brand: S&S®
Displacement: 96 Inch
Horsepower: 102 HP
Warranty: 1-Year
Carburetor: S&S®
Air Cleaner: S&S®
Oil Pump: S&S®
Wiring Harness: Wire-Plus®
Charging System: Spyke® Super Duty® 32 Amp
Coil: 80,000 Volt Mini
Spark Plugs: Autolite®
Plug Wires: Accel®
Battery: SVR®
Starter: Spyke
Pipes: Santee® Shotgun Straight
Ignition: Crane® HI-4
TRANSMISSION
Transmission: RevTech 6 Speed Overdrive Show Polished
Primary Belt Drive: 3” Open BDL® Show Polished
Rear Belt: 132 Tooth 1/18'
FRAME
Brand: Reaper Chopper
Frame Tubing: DOM Seamless
Special: BBC Laser Cut Web in the Neck
Warranty: Lifetime
Downtube Stretch: 6”
Backbone Stretch: 3”
Rake: 40°
SHEET METAL
Tank: BBC 26”, 14 Gauge Steel with Flush Mount Gas Cap
Rear Fender: BBC 12 Gauge Steel
Front Fender: BBC 12 Gauge Steel
Oil Tank: BBC 14 Gauge Steel with Laser Cut Web
Warranty: Lifetime
SUSPENSION
Forks: Pro-One®
Extension: 10" Over
Rear Shocks: CCI®
WHEELS/TIRES/BRAKES
Wheels: Pro-One ‘Storm’ Polished Billet Aluminum
Front: 21” x 2.125
Rear: 18” x 8.5
Tires: Avon®
Front: 2.125” Avon Venom®
Rear: 250 Avon Venom
Brakes: P.M.® 4 Piston Caliper
ACCESSORIES
Bars: CCI Drag
Risers: 6” CCI
Hand Controls: CCI
Grips: H-D
Forward Controls: V-Thunder® Chromed
Throttle: CCI
Lights: CCI
Signals: CCI
Mirrors: CCI
Seat: High End® with BBC Embroidered Logo
Kickstand: White Bros®
Cables: Goodridge® Stainless Steel Clear Coated Assembly and a nice paint job is not inexpensive.....

[jlnorthrup122]

Dude if that is your bike then how in the hell are you gona pull some strippers and take em home with no pee pad!! :D :D

[Kilrtoy]

Quick story,
We started on a road King 19,000 Grand. Then the paint 5,000. Then the hop up that slow ass motor about 3,000. Then to crome and steel braid everything about another 5 to 7 thousand. Rims another 2 too 3 grand. So on the low end I'm at about 34,000 and that is if i do alot of the work myself. But still, it will look like everyone elses bike and I will have no warranty. So I did my homework or so I thought and bought a BIG DOG Chopper.
:mad: <<<<<<BIG BIG BIG BIG MISTAKE>>>>>>> :mad:
The company is ****ed up and so is their dealer. After 7 months of bullshit and lies I got my money back. I started reading about AMERICAN IRONHORSE and was very impressed. Met their dealer and was equally impressed. The wife saw the bike on the floor and had to have it. Here we are today.
It was 32 out the door. If you get basic paint its about 28000 out the door. 3 year warranty on everything and its unlimited. NO ONE COMES CLOSE TO THAT. S & S 107 motor 6 speed tranny 240 rear tire. The ride is nice but if you arent a good rider and have chopper experience I would not recommend this bike. The wife loves the ride, but on the freeway it tightens up and gets a little stiff at around 70. My buddy has a hopped up 2002 road king and we rode this weekend. He was on the gas hard and I was just cruising(MOTOR IS NEW DON"T WANT TO HURT IT) and he could not even stay with me. I cant wait to open it up and see what it has.

[HammerDown]

RevTech motors...now thats a door stop!

[Mandelon]

Dang, Miguel. That is a very nice new toy. I need to get a job doing what you do..... :D

[Kilrtoy]

I know BMC uses those motors, but I really dont know much about them. From everything I read S & S is the only way to go

[Kilrtoy]

Thanks MANDELON,
how the hell do you do your avatar, i want a new one...

[Mrs Sandbar Junkie]

Kilrtoy:
Thanks MANDELON,
how the hell do you do your avatar, i want a new one... I can show you how!!!
http://skins.hotbar.com/skins/mailskins/em/033102/033102bigkiss_1_prv.gif

[Kilrtoy]

Oh show me please baby.....
Let me find a new one and ill send it to you....

[Mandelon]

Kilrtoy:
Thanks MANDELON,
how the hell do you do your avatar, i want a new one... Sure, we could trade. My avatar for your new bike.. :D
Pick out a new avatar first. Copy the url, Go into your profile page, follow the steps to get to avatars and paste in the new one. Simple stuff.
How come you get to have so many nice toys??? You are a lucky man!!

[MagicMtnDan]

Kilrtoy:
I have a suction seat for the Mrs. I was going to ask if you're going to post pictures, could you post one of the Mrs.' suction seat but maybe I shouldn't
jawdrop

[Mrs Sandbar Junkie]

I found one for you. NICE BOAT!!!!!!!! http://skins.hotbar.com/skins/mailskins/em/033102/033102good_1_prv.gif
http://www.***boat.com/image_center/data/500/564P1010274-med.jpg

[Kilrtoy]

That is a nice pic, but there is something wrong I cant place my finger on it. Oh thats it that thing behind them ruins the pic, what is that piece of figerglass......
I work way to hard to not have toys and be broke...Granted the bike I do own.

[Mrs Sandbar Junkie]

Kilrtoy:
That is a nice pic, but there is something wrong I cant place my finger on it. Oh thats it that thing behind them ruins the pic, what is that piece of figerglass......
I work way to hard to not have toys and be broke...Granted the bike I do own. I didn't hear you complaining while @ the river and we were DIPPING GRAPES on that piece of fiberglass!!!! wink

[Kilrtoy]

Im complaining now,I want one and dont have one
cry cry cry cry cry cry cry. cry
By the way share those grapes, they looked like they were smothered in a JUICY SAUCE!!!!!!!

[SCUBA STEVE]

ok now I know I missed somthing when I left. You guys are bad. lol :D

[novaguy]

Nice bike :cool:

[Kilrtoy]

Here it is..