PDA

View Full Version : hull repair



BUSADREAMER
03-22-2006, 09:52 AM
I have a 1977 Sanger dragrunner and have 2 problem's the d ring in the front of the hull is loose and the guy before me gluded it but it's loose again I cleaned all the glue that I can see, now it fits properly, but I need to fix it properly so I can tie the boat down.. 2nd between the engine and the transom inside of the left side runner there is a piece six inch's wide by one and a half feet long that is sticking up, looks like glass or resin not wood, HELP!!!!