How many HP does it take to destroy a drive?

[Havasu Hangin']

I'm gonna say......this many:
http://www.***boat.com/image_center/data/520/74Joeys_Dyno.jpg

[rivercrazy]

Another one? Jeezzzzzz....:D

[Havasu Hangin']

Originally posted by rivercrazy
Another one? Jeezzzzzz....:D
Nope...same one (for now).

[AdrenelineOD]

Isn`t drive abuse illegal????

[Infomaniac]

:D :D :D :D :D

[hoolign]

everything comes up a red ****in x...3 more days till the new computer....then this ones.....a pile o bits

[Havasu Hangin']

Originally posted by Infomaniac
:D :D :D :D :D
Think that'll do it (in your professional opinion)?

[Infomaniac]

If that won't do it nothing will.
Be careful how much throttle is given when going through 3,500 unless you intend on carrying spare quick change drives. The load should be freed up when it gets to 6,000

[Havasu Hangin']

Yeah...I kid him alot about breaking drives, and he always says, "but I was just cruising!"
Yeah...cruising a very wet V-bottom with that much torque...
That sheet almost looks like it came out of Marine Assault's Double Secret Speed Division.

[Infomaniac]

Actually there is a project now in the Marine Assault double secret speed division.
It is not nearly the engine that one is though. It will be a single 3.3 Whipple 4.0" stroke deal. Edelbrock Marine heads. Still in the Desktop Dyno development stages.
Here is a screen capture using 8 lbs of boost which will be the upper limit for this one.
Was able to get the flow numbers from Dustin Whiipple to use as the blower specs.
http://www.***boat.com/image_center/data/506/2118_lb_single_Whipple-med.jpg

[Havasu Hangin']

Originally posted by Infomaniac
Actually there is a project now in the Marine Assault double secret speed division.
It is not nearly the engine that one is though. It will be a single 3.3 Whipple 4.0" stroke deal. Edelbrock Marine heads. Still in the Desktop Dyno development stages.
Here is a screen capture using 8 lbs of boost which will be the upper limit for this one.
Was able to get the flow numbers from Dustin Whiipple to use as the blower specs.
http://www.***boat.com/image_center/data/506/2118_lb_single_Whipple-med.jpg
Very nice.
GRASS PAY$ is using the old-school 10-71 approach....
...according to HEAVYBOAT...that should be worth 100HP or so.

[Risky Business]

I like the way it's still making 350 HP at 10,000 RPM. :) :) :) :)

[Infomaniac]

Nothing wrong with a 10-71.
This one is 120 HP over budget as it is.
Will not be killing any drives. Going in front of a jet.

[Kilrtoy]

Dont know,
I'll never own that much horsepower

[rrrr]

Jeezus, HH. Izzat the motor in the new Queen Mary 2? :D :D

[Dr. Eagle]

Originally posted by Havasu Hangin'
I'm gonna say......this many:
http://www.***boat.com/image_center/data/520/74Joeys_Dyno.jpg
Oh my ACHING CONE CLUTCH!
Crimeny, time for a #6!

[Havasu Hangin']

Here's the business end...
http://www.***boat.com/image_center/data/500/201Boat_shoow_002-med.jpg
BTW...rumor has it that IMCO stepped up with new parts...no post needed.

[Froggystyle]

Originally posted by Infomaniac
Nothing wrong with a 10-71.
This one is 120 HP over budget as it is.
Will not be killing any drives. Going in front of a jet.
Two.... actually

[UnionJack]

There is nothing wrong with the 10-71.... it works fine in by boat, I think it is just joey, maybe it is me also when I am with joey, I have been there for three

[Froggystyle]

Originally posted by RiverDave
In my best Quenton (SP?) Tarantino voice.... "Oh really?"
RD
In my best Samuel L. Jackson voice... "You heard me... English mother ****a! Do you speak it???" :D