What would be a safe total timing to go with? the engine is running 10-10.5 to 1 compression and performer RPM cam?
and how fast do I want it to advance.
Jesse
[This message has been edited by Hydro-Thunder (edited June 06, 2002).]
Printable View
What would be a safe total timing to go with? the engine is running 10-10.5 to 1 compression and performer RPM cam?
and how fast do I want it to advance.
Jesse
[This message has been edited by Hydro-Thunder (edited June 06, 2002).]
Start with 36 deg. full in by 2800-3000. If thats a little lazy bump it up to 37-38. Haven't run across too many BBFs than need much more than that.
go with what 058 said that is spot on and should work out good for you! good lucka nd we will see you on the water! http://free.***boat.net/ubb/wink.gif
Tyson www.plumbersassracing.com (http://www.plumbersassracing.com)
I run a motor of similar specs i run a total of 38 seems best there also run a bottle too 100hp and dont back it down.fuel is 1/2 pump and race or 91 w/oct boost(turn down to 35-36)and have never had problems.
Thanks for the help I am putting in a nwe MSD distributor and wanted a starting point.
Thanks again
Hydro-Thunder