whats going on? its too quite in here!!!!
Printable View
whats going on? its too quite in here!!!!
whats going on? its too quite in here!!!!
Why did ya go and wake me up?????????????????????????
http://www.hotboatpics.com/pics/data...ed_DOGTIRE.gif
Why did ya go and wake me up?????????????????????????
http://www.hotboatpics.com/pics/data...GTIRE.gifcause your suppossed to be working!!! whats happening?
Hopefully finish the boat... how 'bout you? Your parts ever come in you were waiting for?
cause your suppossed to be working!!! whats happening?
Been busy this Am. Have ya made that phone call yet. I'm interested on how they respond to you.
Nothing much new on this end. Didn't get notin done on the 19 this weekend. :frown:
Too much other crap going on.
How about you. Get into any trouble over the weekend?
Hopefully finish the boat... how 'bout you? Your parts ever come in you were waiting for?got everything but the aluminum heads, but if they dont come in time for sommerville all i have to do is put the valve covers and the headers back on and im ready to go.
Been busy this Am. Have ya made that phone call yet. I'm interested on how they respond to you.
Nothing much new on this end. Didn't get notin done on the 19 this weekend. :frown:
Too much other crap going on.
How about you. Get into any trouble over the weekend?already made that call! they said if i couldnt get the spots and streaks off or if i just didnt like it period to send them back on their $$$ and they would re-coat and polish and mail back to me at their cost even if it were after summer they would still honer the repairs. so they are bustin their hump to make it right.
got everything but the aluminum heads, but if they dont come in time for sommerville all i have to do is put the valve covers and the headers back on and im ready to go.
Than the reason you're not coming down for Memorial Day is What :)
got everything but the aluminum heads, but if they dont come in time for sommerville all i have to do is put the valve covers and the headers back on and im ready to go.
I hear you. Who woulda thought boats could ever have so many pieces?!? :messedup: :D :D
already made that call! they said if i couldnt get the spots and streaks off or if i just didnt like it period to send them back on their $$$ and they would re-coat and polish and mail back to me at their cost even if it were after summer they would still honer the repairs. so they are bustin their hump to make it right.
Thats good to hear!!! Now we know that they stand behind what they do. :D
Than the reason you're not coming down for Memorial Day is What :)you said you werent going cause your too busy!!! haha,i just cant make it, too many things catching up with me,almost through with the fence in front of the house,today will be 8 straight days working on it and im pooped! the pool is warm enough to swim in but i've been too busy to vacum it,,kinda green on the bottom... you know how those alligators can be!!
I hear you. Who woulda thought boats could ever have so many pieces?!? :messedup: :D :Doh yea somthing tells me i should also put the new throttle cable in the boat being the hot foot is laying on the ground beside the boat :hammerhea :hammerhea :hammerhea
oh yea somthing tells me i should also put the new throttle cable in the boat being the hot foot is laying on the ground beside the boat :hammerhea :hammerhea :hammerhea
You saying that reminds me, are foot throttles pretty generic? How would I go about IDing what type cable I need? The base of my throttle is broken. I can use it if I really have to, but just kind of a pain getting it screwed down, thought about replacing it. The cable is operational, but leaves a little to be desired if ya know what I mean... I can't find any kind of ID on the cable or the foot throttle.
You saying that reminds me, are foot throttles pretty generic? How would I go about IDing what type cable I need? The base of my throttle is broken. I can use it if I really have to, but just kind of a pain getting it screwed down, thought about replacing it. The cable is operational, but leaves a little to be desired if ya know what I mean... I can't find any kind of ID on the cable or the foot throttle.most cables are pretty much generic in this catagory,when i ordered my cable from rex marine all they ask me was how long it was from thread tip to thread tip and the size of the thread. yea pretty basic..what part is broken on your hot foot?
The base... As of right now, the pedal is on one half, and where the cable runs thru & attaches is on the other. It was like that when I bought the boat, looks like its been broken for a long time. Somebody tried to JB weld it to no avail. Like I said, it's usable, cause the 2 halves line up damn near perfectly & there's mounting holes on both sides of the break, but just kind of crappy & a general pain in the rump to get mounted.
The base... As of right now, the pedal is on one half, and where the cable runs thru & attaches is on the other. It was like that when I bought the boat, looks like its been broken for a long time. Somebody tried to JB weld it to no avail. Like I said, it's usable, cause the 2 halves line up damn near perfectly & there's mounting holes on both sides of the break, but just kind of crappy & a general pain in the rump to get mounted.kinda hard to tell without seeing it but i'll bet when we get to sommerville and we put all our heads together we can come up with a solution that will fix it!
Hey old buck, what kind of heads you buy? What did you have coated. Im so ready for Somerville i cant stand it.
Kevin
My wife found one on ebay that was going for $65 or something like that. That throttle wouldn't be difficult to replace. Might end up with a couple extra screw holes in the floor, but that's what silicone's for right? Figure I'll use this one for now, get her going, then swap it at a later date. Woo hoo! Did somebody say Sommerville?
Hey old buck, what kind of heads you buy? What did you have coated. Im so ready for Somerville i cant stand it.
KevinAir Flow Research (AFR) 104cc chamber rect. port. i had the headers and valve covers done at jet-hot.
My wife found one on ebay that was going for $65 or something like that. That throttle wouldn't be difficult to replace. Might end up with a couple extra screw holes in the floor, but that's what silicone's for right? Figure I'll use this one for now, get her going, then swap it at a later date. Woo hoo! Did somebody say Sommerville?that doesnt sound like a bad deal! i havent priced them though? you better do somthing your gonna look real funny with a big string tied to your big toe for the throttle...
that doesnt sound like a bad deal! i havent priced them though? you better do somthing your gonna look real funny with a big string tied to your big toe for the throttle...
That'd be somethin wouldn't it!! Too funny, now I've got a back up plan! I think last time I looked at Rex, they were around $125?? Gimme a sec, I've got the Rex site up in another window, I'll just look.
Mine doesn't look exactly like those, but pretty similar. Mine would be a push throttle I guess... Here they be:
http://shopping.rexmar.com/Merchant2...001/360213.jpg
$97.65
That's like the one on ebay. They go up to the mid $100s from there...
Mine doesn't look exactly like those, but pretty similar. Mine would be a push throttle I guess... Here they be:
http://shopping.rexmar.com/Merchant2...001/360213.jpg
$97.65
That's like the one on ebay. They go up to the mid $100s from there...thats still not a bad price!
Naah, I didn't think so either. Get that & a new cable to go along with it, have the whole throttle situation covered for less than $150 or so!
Air Flow Research (AFR) 104cc chamber rect. port. i had the headers and valve covers done at jet-hot.
Wow AFR's huh, someones big ballin. They are tops from what i hear.
What you mean 104Cc, you have a BBC right? I thought afr's started at 305CC chambers?
Well Old Buck, you were asking about the weekend. If the weather cooperates, I'll be finishing these! I'm pretty proud of how they turned out!
http://www.theinsideline.net/forum/a...id=11456&stc=1
http://www.theinsideline.net/forum/a...id=11457&stc=1
Wow AFR's huh, someones big ballin. They are tops from what i hear.
What you mean 104Cc, you have a BBC right? I thought afr's started at 305CC chambers?they do but with the iron heads i have now i have around 9.75-1 on compression with the 305's it would have taken it down to about 8 to 1. the 305cc are made for pop up pistons so they say,all they did was angle mill the new heads to make the chambers 104cc's so they will work well with my flat top pistons and kick the compression back right at 10-1 and i can stay on 87 octane or up if i want to!
Well Old Buck, you were asking about the weekend. If the weather cooperates, I'll be finishing these! I'm pretty proud of how they turned out!
http://www.theinsideline.net/forum/a...id=11456&stc=1
http://www.theinsideline.net/forum/a...id=11457&stc=1
huh nothing but red X'S
I'll be damned! They showed up for me!? Lemme try again...
http://www2.***boat.com/image_center..._interior1.jpg
http://www2.***boat.com/image_center..._interior2.jpg
Not tryin to double post, did they come out that time?!?
Not tryin to double post, did they come out that time?!?yep they came out,,,looking good! looks like one to go and you'll be through!
Oh, 104 chambers. I thought you were talking about the intake runners. Got it. Those should be bad a**. Can't wait to see them.
Damn near!! Thank you! Guys, I gotta split! Speak with you gentlemen later!
Oh, 104 chambers. I thought you were talking about the intake runners. Got it. Those should be bad a**. Can't wait to see them.yea i cant wait till they get here,should lighten up the sj quite a bit! well im outta here too gotta go to my other job,at the honey do ranch!
Hey Old Buck, Good to hear that Jet Hot is trying to help you out.
I got to go out to Somerville, yesterday, but kinda had some problems :(
Sorry i couldn't make it out Sat., got called in to work.
I heard there was a jet that wasn't running good was that you Greaser?
If so did you find the problem?
Hey Old Buck, Good to hear that Jet Hot is trying to help you out.
I got to go out to Somerville, yesterday, but kinda had some problems :(you either do or dont,whats this kinda stuff??? what happened?
Sorry i couldn't make it out Sat., got called in to work.
I heard there was a jet that wasn't running good was that you Greaser?
If so did you find the problem?
Well, if it was on saturday, it wasnt me. I didnt go out till sunday
you either do or dont,whats this kinda stuff??? what happened?
Well, When I launched, everthing went well. But, after about 10 minutes of cruising around, and 1 pass at WOT, I noticed that I wasnt getting my max rpm, so I let off,then hammer it again, and then I get my max rpm. So then I start to slow down, and get into the no wake zone, and get to an idle. After that I notice that My oil preasure is droping. (it droped all the way to zero) So I shut it off, and coast back to shore. I got out, and checked to see if I had an oil puddle, (no) so I let the motor cool down some, and I check my oil. The oil level was higher than normal, really thin, and smelled like gas. Oh, I forgot to mention that when I was at idle, I had alot of black smoke coming from the exhast.
So, I put it back on the trailer, and jumped into my parents boat, and had a great day tubing. :D
That sux! There's a lot to be said for making it back to the ramp though. I've done enough "floating broke" to last me already. Hey, you did have a back-up boat though! I've seriously considered buying another run around boat to have on hand for breakdowns or fishing & stuff... :D