Printable View
OEM 4 Bolt Block, 2pc
Line Honed
0 Decked
Scat 4340 Crank, 4.250"
Scat H-beam 6.385" Rods
18CC Dome Probe Pistons
Plasma File Fit rings
Clevite H Bearings
Internal Balance
$3200
Delivery in Torrance, CA area available. Truck freight shipping available.
Is this a Gen-4,5,6? or Is it a Gen-7 as in 496HO?
Is this a Gen-4,5,6? or Is it a Gen-7 as in 496HO?
Probably a gen-4 note -two piece probably means two piece rear main. Gen-4:D Mike
OEM 4 Bolt Block, 2pc
Line Honed
0 Decked
Scat 4340 Crank, 4.250"
Scat H-beam 6.385" Rods
18CC Dome Probe Pistons
Plasma File Fit rings
Clevite H Bearings
Internal Balance
$3200
Delivery in Torrance, CA area available. Truck freight shipping available.
How is it that you're selling a motor for Nathan Miller that owes me money in another thread??? Something waaaay fishy going on here.....
Guys, I have no idea who Nathan Miller, this belongs to a Shawn Mendenhal who is head of engineering at Probe Racing.
snake321 this is not the same one. i checked nathans post and though they look to be the same they are not. check out the rods and pistons they are not the same.
snake321 this is not the same one. i checked nathans post and though they look to be the same they are not. check out the rods and pistons they are not the same.
both have probe pistons but different rods.
Seems everybody is from Torrence......
Sorry for highjacking the thread....
Glad that is cleared up. I called the owner and if someone wants to make offer he will consider it. . ..just trying to free up some inventory $$$'s.
This is an OEM 4 bolt block, Gen 4.
What's the compression ratio?
What's the compression ratio?
Probably about 10.25/1 -10.4/1 based on 119 cc chamber, depending on what head gasket you run.
Hi Chris-
I'd be interested in discussing this with you. I sent you a PM and you can email me at wgibb@aol.com.
Bill