-
Anyone run these? I have a set that's been on the shelf and since the motors out right now I was thinking about throwing them on. I'm running the IMCO looking valve covers seen here
http://www.justanothertoy.com/photog...p/P3163663.JPG
I put the adjusters that come with the girdle on. I spun them on by hand, but not tightened down. The valve cover sits on top of the damn adjusters. I'll adjust them down tomorrow and see if I get the clearance needed, but curious if anyone knows for sure :hammer2:
-
try showing a pic of the stud girdles... :cool:
-
I run Crane stud girdles with Imco covers. You have to cut the drip oilers off and 2 rockers on each side must be slightly clearanced to clear the valve cover bolt hole.
-
I run Crane stud girdles with Imco covers. You have to cut the drip oilers off and 2 rockers on each side must be slightly clearanced to clear the valve cover bolt hole.
What do they run for, brand spanking new?
-
This fits under Imco covers. You can see one rocker clearanced for the bolt hole boss.
Not sure how much they are new 78
http://www.***boat.com/image_center/...valves-med.JPG
http://www.***boat.com/image_center/..._train-med.JPG
-
I guess my valve covers weren't actually IMCO. They didn't have anything on the underside except a baffle plate right below the breather. Those bolts appear to be what was causing the interference. A little playing around and I fixed that problem :D
I noticed the shop had to clearance my one rocker on each side as well. At least it appears to be a normal fix. :hammerhea
Hey Info, I noticed when I torque the bolts that go through to the upper bars it tends to bend the bar in some in the middle. I wonder why they didn't put a stop bolt here like on the lowers?
http://www.hotboatpics.com/pics/data/500/30girdle.jpg
Craig
-
Nothing bolts right on. You have to modify something. Comes with the territory. Universal fits nothing. Bolts right on doesn't either.
What I have learned anyway.
-
What do they run for, brand spanking new?
Looking in Summit they run $249.95 for the big Chevy with all the hardware and the poly locks. ;)
Part Number CRN-13602-1
-
Looking in Summit they run $249.95 for the big Chevy with all the hardware and the poly locks. ;)
Part Number CRN-13602-1
I guess I just scored then. I got a set for $120 that are brand new, maybe four runs on them.....