I need help. I am looking for a waterpump that is driven off of the cam and had a drive for a enderly style injection pump. Does any one know who make them? And where i can get one?
Printable View
I need help. I am looking for a waterpump that is driven off of the cam and had a drive for a enderly style injection pump. Does any one know who make them? And where i can get one?
Blown540,
Kuhl Products (MIKE KUHL) makes one. Works good, best to buy a new one, not used. ( they changed the sealing part on the newer ones.) It would be good to use the front cover they make for it also. 714-547-7071
What I mean is the timing chain cover. That way all holes line up properly. Then your pump bolts right on to it!
You can use any cover that is set up for an injector pump that has the 3 hole mounting pattern. I need an extension anyway so I used an Enderly extension. It has both the 3 and 4 bolt patterns on both ends.
On my new engine I need a new cover so I thought the Old Kuhl River Rat would look nice. (they also make a billet one) The lower fins on the cover hit the balancer. I cut them off so it worked out ok.
Here are some pics of the cover and pump. The one you need is the one in the middle.
http://free.***boat.net/gallery/Gear..._and_cover.JPG
http://free.***boat.net/gallery/Gear...ives/pumps.JPG
While I was cutting the cover I enlarged the water inlets to 1/2" NTP.
http://free.***boat.net/gallery/Gear...ront_cover.JPG
Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!
Teague sells the Magnaflow pump (cam driven). It's a much nicer piece than the Neovane.
Costello
Read the guys question. We are not telling him to use a neovane pump. He needs to stack an injector pump on it. And if your buying a Magnaflow from Teague..?? Well I wont say the rest....
Originally posted by blown540flattie:
Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!
Hey blown540, if it'l help, check out the pics of my Daytona, maybe give you some ideas....
http://briefcase.yahoo.com/gofastracer
Tom you are right, I didn't read the question properly regarding his injection pump granted. Did I say you told him to use an Neovane? No, you told the guy to use the Kuhl, I copy that loud and clear. Thinking he was only looking for a cam driven pump, I'm just suggesting he stay away from the Neovane, that's all. Tom regarding your comment about Teague, NOT COOL. When Menkens comes up in a less than positive light, I jump right in defending your V-Drive company relentlessly, because I like you. Businessmen should support businessmen positively or remain silent In My Humble Opinion.
Costello
Criticism and Point taken. Sorry to get under your skin that bad. I waited for you to come back on that night. Then I was gone Vintage MotoCross Racing. It was late and...I wont say the rest...