Printable View
just wondering what kind of set ups people are running on there 33 daytona's
i am running 880 hp sc motors with 2" imco shorties on xz drives with boxes
went for the first ride today with the shorties 120 mph at 6100 rpm with 32 bravo one props
and that was only 3/4 throttle on the rev limiter
need bigger wheels
:)
Sounds like you will be flying!! Ya know it won't hurt the motors to string them out to 6500 or 6600 just to see how far it will pull the 31's. It will definately help you pin down what pitch you really need. With the sticks you are running the motor might like it up there! You will need tachs that read over 6000 RPM though!! :p If you get 130 your Eliminator buddy will be chillin and turnin up the boost!!
If you get 130 your Eliminator buddy will be chillin and turnin up the boost!!
:p :p
I have 2 Hydromotive 32" P5's you may be interested in.... I am told they will act alot like a 34-35" Bravo 4 blades ... they are in perfect condition and I will make you a very nice deal on them... PM me if interested
just wondering what kind of set ups people are running on there 33 daytona's
i am running 880 hp sc motors with 2" imco shorties on xz drives with boxes
went for the first ride today with the shorties 120 mph at 6100 rpm with 32 bravo one props
and that was only 3/4 throttle on the rev limiter
need bigger wheels
:)
i'd suggest trying some labbed 36 bravos... what's your gear ratio?
I'm running twin SC 950 HP 600 cu/in Merlins hooked up to #5's. I run 35 x 17 cleavers. As it sits now, I run 125 before I run up against the rev limiter. I need taller gears to bring the RPM's down. I'm running the stock 1.5 gears in the #5's. The down size to my boat is it weighs a bloaty 10,000 ounds dry!
i am running 1.36 gears
i also have a set of 36 bravo's non labbed that i am going to try next week
anyone running the dana monster tab?
i am thinking of changing from the k plane to the monster tab i just don't know if it will help anything