-
I stopped by to check on it today, and the paperwork is still not ready, but I had a chance to go over the boat again, and here is what I found (bear with me, I don't know all the "proper" names for V-drive parts yet):
Approx. 18' Glass over wood true flat bottom, no label's, stickers, or HIN #,
the glass is lifting and the plywood is coming apart, so the hull is junk. :yuk: :cry:
Halibrand Marine Products "V" box (forgot to check gear ratio, sorry)
Debold's 9 degree thru hull prop shaft housing (stuffer box??) with brass (edit) 3 blade prop, all driveshafts, crank flange, flywheel, etc. for a Chevy (had a SBC). V box turns freely, prop shaft is 1" diam. everything appears to be in decent shape
some sort of mickey mouse electric (edit) water pump set-up :confused:
Skag (belly fin) brass
full width trim plate w/stainless turnbuckles, (may keep for my Witchcraft project) :rolleyes:
Nicson stringer mount throttle pedal and cables (definately keeping this for my Witchcraft project)
Thru hull exhaust tips (appear to be aluminum?) :confused:
full cable steering system w/brass (bronze?) rudder, steering head (what the wheel mounts on) , etc. Rudder is rigged with 2" pulleys on each stringer and an 1/4 round cable drive (edit) on the rudder. Steering moves freely.
Pic's posted below
Since I have no idea what this stuff is worth I will have to trust in everyone's honesty to come up with a fair price. :rolleyes:
I know, "it's worth about $15 all together" right??? :devil: :p
If your interested in any of this stuff either post here or send me a PM and let me know what it's worth to you. All reasonable offers considered and buyer pays shipping.
-
-
Bump to the top, editied the parts list, should have it at the house today or tomorrow. Pic's will follow as soon as it gets here.
-
-
Here are the pic's (finally)
Steering parts (upper rudder shaft support not in picture) most parts are Nicson, complete from steering wheel to rudder:
http://www2.***boat.com/image_center...ing_system.JPG
V-drive and assoc'd parts (Halibrand Marine Products "V" box, Debold's 9 degree thru hull prop shaft housing, 1" dia. prop shaft, (all pieces from crank flange to prop nut are there)
http://www2.***boat.com/image_center...6driveline.JPG
Fuel tanks, steel (appear to be about 5 gallons each):
http://www2.***boat.com/image_center...66000_0245.JPG
The donor (boat no longer exists) year, make, model unknown, appeared home built, thin glass over wood:
http://www2.***boat.com/image_center...parts_boat.JPG
http://www2.***boat.com/image_center...rts_boat_2.JPG
-
TTT, one last time.
If interested in any of this stuff let me know otherwise it goes on E-bay on the 5th. I'm looking to get rid of it, so make me a fair offer and it'll probably be yours.