ride plate angle ?

[texas-19]

I have a ? about the ride plate angle on a tx-19.If i raise the angle more then about 1 1/2 degrees up from the keel it will start to porpoise even with the nozzle all the way down.I would like to get it freed up some more without the porpoising at cruising speed.Any help would be appeciated.
Mike

[Jetdriver]

Might want to check for hook!

[texas-19]

ok,i'll check it.Thanks

[Jake W]

Do you have a droop?
Jake

[texas-19]

Jake,
yes,i have a aggressor droop and diverter with a dominator pump.

[texas-19]

[img]http://www.***boat.com/image_center/showphoto.php?photo=49196[img]
Here is a picture of it.Hope it works,this is the first time i tried to upload a picture.

[texas-19]

http://www.***boat.com/image_center/...t=7&thecat=500
One more try

[texas-19]

http://www.***boat.com/image_center/...hp?photo=49195
If this don't work could someone help?

[texas-19]

http://www.***boat.com/image_center/...smrvl7-med.jpg
OOOOONNNNNNNNEEEEEEE MORE TIME

[460rogers]

NICE BOAT
How far down does the aggressor droop put the nozzle?
Do you have any wedge or running it flat to the bowl?