Reply With QuotePimp out your Walkman with a 12v adapter.
I need some ideas for putting a system in my new truck.04 Crew cab Ford F-250.I dont want to move the back seat if I dont have to.
Lets hear some options from the stereo gurus!
Pimp out your Walkman with a 12v adapter.
I need some ideas for putting a system in my new truck.04 Crew cab Ford F-250.I dont want to move the back seat if I dont have to.
Lets hear some options from the stereo gurus!
possibilities are endless
as far as moving the rear seat goes JL makes a stealth box loaded with a 10"
wo.That sounds pretty good considering it is totally hidden.Replaces lower coushion of center front seat (or counsel)using original upholstry.
Sells in Havasu for 499.99
Could build a box for alot less but you would have to give up a bit of space.
Amp will fit under rear seat or have put behind rear seat(with mods).
Your speaker size is 5x7 many good ones out their.I like the new Clarions
Src5795 two way plates.About 139.99
Can also get a nice Focal pollyglass 6.5 in their.About 349.99
Would still go with the lesser for the rear doors unless you have people in the rear at most times as these will only be for fill.
Got the DXZ945MP head unit in mine.(rocks)(699.99)
All can be powered with one amp say the Autotek SX5750.(399.99)
If you go the route of the big box may need to split amps as this one only has about 200watts for the subs.(at 4 ohms) Plenty for the stealth sub.
This is a VERY common truck lots of ways to go this was just one or two.
I think I will be using the center stealth box for sure,but might want 1 more 10 in the back.Focal 6.5 in the doors and rear and maybe some old style PPI's for amps.Kenwood 7015 for in the dash.
Jrocket,
sent you a PM
Hey J,
It may sound funny but I looked at the stealthbox too and decided I didnt want to give up my lower storage under me seat in my 04' Dodge 2500, so I have a MTX Thunderform molded box loaded with JL 001 10's and I push it with a Fosgate 400 watt amp. it is plenty but not anything near to what my boat is. My car stereo has been stolen so many times that I just left the stock deck in so as not to attract attention, also I can use my steering wheel controls still (volume, track, cd or xm etc...) The box with JL's was still around 500 bucks.
here is the MTX box, mine has 2 but you can only have a single 10" it seems.
http://www.mtxaudio.com/caraudio/pro...ures/FSC10.cfm
Im open for all ideas.If I could put a box behind the seat and only have to move it a small amount then id do that.Still looking for mroe ideas though.
Bring it over here. Well put a body lift on it, completely cut out yout floor and add 7 inches of depth put a sub floor in. We'll put 8 Boston pro 10's in the floor, put 2 pair of components in each door in completely custom panels and put 6 amps in the rear. 3 on the rear panel then the other 3 built into the back of the rear seat. I'll motorise all of your saets to lift and flip in order to expose the floor and rear seat amp area. What about the dash you say? you don't need no stinking dash. We'll fab a new one that completely sizes and retracts(clusters, pedals, and controls move) when you push your button on your alarm remote upon entering the vehicle. All Alpine F1 status gear with a full surround sound.
I'll get Charlie to help out with the interoir lighting ;D
When you wanna drop it off?
Hey... this is kind of blue sky but think about this...
You could try running fairly high Qts poly cone drivers mounted on the floor of the truck firing down with the outside world providing the infinite baffle. You would lose a few dB when you roll down the windows.
You'd probably want to shield the cones a bit from road hash but it wouldn't take too much. You could even hang the baskets under the truck if room were a problem and the truck lifted high enough but then you might get trash in the spiders and such if they aren't shielded sufficiently. I think it would be a pretty slick infinite baffle solution.
I'm actually serious on this one...
Any response?
Posting Permissions