I heard HBjet just got a rail kit. Email him for the details.
Brian
Just wondering if you guys know anyone out there besides CP that is producing Rail Kits and trick motor plates with nice feet? I am looking into having some custom made. Do any of you know where I could start? Thanks in advance
I heard HBjet just got a rail kit. Email him for the details.
Brian
Hi Bense,
Rex has some 30" rails...seems a little short but they do have them. Also the front and rear plates and little feet in 2" size. Looks like they will discontinue the 1.5's. Don't think they have a "kit" like CP but you could buy separate.
jer
Rail kit sounds cool but the material is just aluminum angle. I took out the pieces of swiss cheese that someone who didn't know how to measure had used before, and bought aluminum angle and made new mounts as well as a new front engine mount plate. It isn't rocket science. Just a matter of laying out hole patterns and drilling holes. I ran the aluminum angle from the transom all the way forward to the bulkhead and mounted the seats to it also. I have less than a hun in material.
[This message has been edited by Unchained (edited March 11, 2002).]
Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net)
Originally posted by flat broke:
Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) I got the rail kit for HBJET and he picked it up at Tom Papps shop. If anyone needs a rail kit at a good price contact John at J&M Marine. Thanks
If anyone is in the OC area you have to check out Schorr Metals. They have the best rem/scrap bin I have ever seen. It's only a 1.90 a pound.
If you need to have anything cut on a mill let me know and I'll help you out.
Originally posted by JohnATJmmarine:
Originally posted by flat broke:
Bense,
HB picked up his rail kit from Tom Papp. You'd have to email him for the price details, but the kit was very complete including all fasteners etc.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) I got the rail kit for HBJET and he picked it up at Tom Papps shop. If anyone needs a rail kit at a good price contact John at J&M Marine. Thanks
Sorry about that John, Didn't mean to steer anyone in the wrong direction.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net)
Originally posted by flat broke:
Sorry about that John, Didn't mean to steer anyone in the wrong direction.
Chris www.liquidaddiction.net (http://www.liquidaddiction.net) No problem. Just wanted my props from HBJET. Just joking.
Try lighting performance marine http://www.boatheaders.com/index.htm