PARTS SWAPMEET-Once again!

[396_WAYS_TO_SPIT]

Oh and by the way i am looking for a cheap SPLIT BOWL Let a brotha know. I got my wedge comming and I bought my droop today. So all i need is a split bowl.
396
Yey 396,
I have a split bowl… I am interested in your MSD 6AL.
Lets talk.
:mix:[/QUOTE]
You got a pm bro!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
396

[FOURQ]

sold.....GONE
http://www.southwindjetboats.com/seats.jpg
set of 454 logs 100.00
http://www.southwindjetboats.com/bbc%20logs.jpg
bbc rail platesw/ rails but no feet 25" overall 23" center to center 100.00.....GONE
http://www.southwindjetboats.com/plates.jpg
12 gallon fuel tanks 50.00.....GONE
http://www.southwindjetboats.com/tanks.jpg
olds ski tow free.....GONE
http://www.southwindjetboats.com/ski%20tow.jpg
97 20' southwind cruser 18,000. obo
http://www.southwindjetboats.com/DSC00024.JPG
you pay all shipping

[hondajoey]

I also have a set of heads, rectangle ports, bare, but have the valves, springs, guide plates and the rest of the goodies to go with them. They're 106cc closed chamber heads. Ported and polished intake and exhaust. Apparently they have some minor cracks in the valve bowl area. Can sell bare or complete. Valves and springs have less than 5 lake trips on them. Make offer.[/QUOTE]
How much for the heads and where are you located

[Jordy]

How much for the heads and where are you located
Heads are casting # 3964291. I'm looking to get $250 out of them complete. 396, here on the boards had them checked out and there are apparently some small cracks somewhere in the vavle pockets. They must be very minor as the boat was running great before I pulled them off.
http://www.***boat.com/image_center/...22DSC00206.JPG
http://www.***boat.com/image_center/...22DSC00207.JPG
I've got all the valves, springs, keepers, etc.
Here is the intake and carb:
http://www.***boat.com/image_center/...22DSC00204.JPG
I'm in Phoenix too.
*INTAKE IS SOLD!!!!! STILL HAVE THE CARB, SPACER, AND THROTTLE MOUNT

[Some Kind Of Monster]

How much for the blower Jordy?

[Jordy]

How much for the blower Jordy?
$30,000. But it comes in a handsome carrying case:
http://www.***boat.com/forums/attach...tid=6204&stc=1

[hack job]

460 ski tow $30 455 ski tow$30 455 logs $175 455 flywheel $40 460 thermostat cover $15 455 olds thermostat cover $15 454 BBC v-drive front mounting plate $150 455 olds drive shaft $50 .......pm me for more info or call me at 1-925-595-0397 :mix: :devil:
do you have a pic of the ski tow. iam currently in the market for one for a 460

[shaun]

Mallory Dist for 454, dont know if it works, it did a like 6 years ago, make offer.
http://www.reitanfamily.com/albums/S...1216.sized.jpg
Dooley 10QT Stroker pan with oilpump and pickup (welded to pump), also comes with the windage tray shown(gen4). $180
http://www.reitanfamily.com/albums/S...1219.sized.jpg
What are i beleive TRW pistons, .040 over, used for a hour at most. pins and rings come too but you'll probably want new ones, make offer
http://www.reitanfamily.com/albums/S...1226.sized.jpg
Stock 454 external balancer(gen4), make offer
http://www.reitanfamily.com/albums/S...1229.sized.jpg
Stock 454 oil pan and pump with pickup(gen4), mke offer
http://www.reitanfamily.com/albums/S...1231.sized.jpg

[396_WAYS_TO_SPIT]

still looking for a set of UNCRACKED closed chamber bbc heads.
396

[franky]

IMCO polished stainless steel 10 1/2 gallon tank with brackets and aluminum cap. MSD 3 stage ignition retard controller.
Both on E-Bay