Chevy Motor 454

[grump]

Who has a stock 454 Block and Heads? Have crack, can't find it...water in the oil.

[Jordy]

Are you sure it's a crack? How did you determine this? What else have you looked at problem wise? Are you running OT headers with water injection? Logs? Big cam? What is your water pressure in your block under power? Kind of sounds like you're grasping at straws if you're looking for a block and heads. Water in the oil can come from a few sources with a jet boat. Give us some more details.

[TRG]

have a set of big oval heads and matching intake!
call if interested!
626-991-9031
todd

[grump]

i pressured up the block and heads with water and nitrogen to find the leak. Ihave had a lot of problems with this motor. last summer a valve stuck and i lost 1 piston. i had a 800 hundred lift cam in at the time. i now have a 650 lift, and just had the head repaired from stuck valve and piston collision , head was supposed to have been magnafluxed

[Chris J]

I had the same problem a few years back. Turned out the water was seaping in through one of the head bolts. Did you use permatex #2 on the head bolt threads. A stock BBC doesn't have blind taps in the block.

[lucky]

if you have a oil cooler - check it ! had a boat with one that cracked - same thing ..

[wideopen545]

I Have A 030 454 Two Bolt Fresh Out Of The Mech Shop Cam Bearings Installed And Brass Freeze Plugs
All Parts Still In The Boxes
Large Oval Heads Checked Good
Manley Sever Duty 2.250 In And 1.90 Exh
10/20 Cast Crank
Truck Rods
Comp Cam And Lifters Solid Lift And Springs
New Mildon Oil Pan
New Weind Team G Intake
Morose Valve Cover
1700.00 If You Can Use It
You Need Pistons, Rings And Bearing ,gaskets

[Squirtin Thunder]

I Have A 030 454 Two Bolt Fresh Out Of The Mech Shop Cam Bearings Installed And Brass Freeze Plugs
All Parts Still In The Boxes
Large Oval Heads Checked Good
Manley Sever Duty 2.250 In And 1.90 Exh
10/20 Cast Crank
Truck Rods
Comp Cam And Lifters Solid Lift And Springs
New Mildon Oil Pan
New Weind Team G Intake
Morose Valve Cover
1700.00 If You Can Use It
You Need Pistons, Rings And Bearing ,gaskets
I am not a chevy guy but that looks like a very good price or is it a steel ???

[wideopen545]

Its A Good Price Iam Trying To Help A Friend Out He Got In Some Trouble And Wont Be Needing It For A While So Were Selling Off His Stuff To Get Him Some Money
Thanks Tim
540.871.4833

[Squirtin Thunder]

Its A Good Price Iam Trying To Help A Friend Out He Got In Some Trouble And Wont Be Needing It For A While So Were Selling Off His Stuff To Get Him Some Money
Thanks Tim
540.871.4833
That is very nice