Reply With Quotehey guys...i have the jg bowl..the two plugs..you just remove them both and fill it with 90w oil? what about the fitting inside the boat, how often should you grease that one?
thanks
brian
Froggy
Neither it is a about a penguin.....
penguin drives into a repair station with his car leaking oil every where asked the mechanic if he would check it out while he has a look around town. Mechanic said sure....Few hours later the Penguin comes back eating an ice cream cone and has it allover his face and the mechanic look up at him and says "Looks like you blow a seal". Penguin says "no no, it is ice cream"..
told ya it was a bad old joke
hey guys...i have the jg bowl..the two plugs..you just remove them both and fill it with 90w oil? what about the fitting inside the boat, how often should you grease that one?
thanks
brian
Mellow,
I have a JE with 2 plugs on the bowl and a fitting on the thrust bearing. I grease the bearing on the inside and then pull the plugs and fill the plug holes with oil until it pops out the other side. Seems to work well.
thanks joey.
Posting Permissions