Recently switched to a tunnell ram setup. Carbs are sideways mounted with Rex linkage. Anybody have photos that they can post on the way the morse cable hooks up. Did you make a bracket or ? :idea:
When I installed my Edelbrock tunnel ram with inline carbs I fabricated a 1/4" aluminum plate that bolted to two of the carb adapter plate bolts on top of the tunnel ram and mounted the cable clamp to it.This was a custom top plate with a split dominator on it.Sorry I dont have pics I deleted them last week.
Did you look at the carb linkage accesories that Rex carries?Check this link to REX Marine http://www.rexmar.com/page198.html
I had the same problem you are having last year. Asked the same question. The answer is you will have to make one. Because they are mounted sideways, it seems I could never find one that quite worked. Here is a link to my question...
http://www.***boat.com/forums/showth...hlight=linkage
Thanks Cole/Sanger, yes that is the same linkage that i have. Guess i will have to make somthing. I dont have a ski tow so we will see.
Recently switched to a tunnell ram setup.
I'm curious as to which Carbs you are going to be running on the Tunnel Ram?
Yeah, I hated that ski tow setup with the linkage. My buddy made that up real quick so I could get on the lake for testing. I am sure the guy that bought my boat will make a nice piece for it. Good luck with your search.
Recently switched to a tunnell ram setup. Carbs are sideways mounted with Rex linkage. Anybody have photos that they can post on the way the morse cable hooks up. Did you make a bracket or ? :idea:
Don't know what manifold you have, but I made this simple deal for my Weiand, never got to anodize it though!...
http://www.hotboatpics.com/pics/data...TunnelRam1.jpg
Gofast, yes that is the same setup as mine. I was snooping around at GS's place today to get some ideas. Yours looks like it would work good. Also saw some fabricated brackets that were secured to the intake bolts. Thanks for the help.
BN, i had a bunch of summit bucks to burn so i am going to give these a try, hope they work out.
http://www.proformparts.com/mistore/...pany_id=100719
Gofast, yes that is the same setup as mine. I was snooping around at GS's place today to get some ideas. Yours looks like it would work good. Also saw some fabricated brackets that were secured to the intake bolts. Thanks for the help.
BN, i had a bunch of summit bucks to burn so i am going to give these a try, hope they work out.
http://www.proformparts.com/mistore/...pany_id=100719
There ya go it's a no brainer to make, probably cost ya a whole $1.50!...
Posting Permissions
Reply With Quote