Results 1 to 4 of 4

Thread: Project Update:

  1. #1
    cyclone
    Well we flipped my hull over last night. It was scary! We lifted the front with a forklift and chain and lifted the rear using an engine hoist and heavy duty tow strap looped around the pump. The bottom is all sanded down ready for filler. I should prepped for paint by next weekend. I'll have pictures later in the week.

  2. #2
    77charger
    About how long did it take.I have my pump out right now and am pulling the motor to ease the pump install.Was thinking this will be a good time to paint the trailer.

  3. #3
    cyclone
    it took about ten minutes to lift the boat and flip it. You could do it with a pair of engine hoists if you dont have access to a forklift. After I flipped it, I laid it back down on some padded 2x4's that I laid across the trailer.

  4. #4
    cyclone
    it took about ten minutes to lift the boat and flip it. You could do it with a pair of engine hoists if you dont have access to a forklift. After I flipped it, I laid it back down on some padded 2x4's that I laid across the trailer.

Similar Threads

  1. Project update
    By BrendellaJet in forum Jet Boats
    Replies: 25
    Last Post: 04-11-2007, 03:53 PM
  2. Project Update
    By Jetaholic in forum Jet Boats
    Replies: 0
    Last Post: 03-16-2007, 10:28 AM
  3. Project update
    By Cole Man II in forum V-Drives
    Replies: 29
    Last Post: 12-28-2006, 09:36 PM
  4. Marlin project update
    By Marlin455 in forum Jet Boats
    Replies: 5
    Last Post: 07-05-2004, 06:22 AM
  5. Project update YabaDabaDoo
    By stilettovdrive in forum V-Drives
    Replies: 27
    Last Post: 08-10-2003, 12:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •