Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Magnaflow Exhaust is looking for 96-01 Ford F-150's (Free Exhaust)

  1. #1
    Cole Trickle
    Hello fellow ***boaters,
    My name is Brandin and I work as the Poduct Development Coordinator at Magnaflow Performance Exhaust.
    We are currently looking to add the 96-01 Ford F-150 to our direct replacement catalyst line up and need your help.
    We are looking for trucks that are unmolested in the catalytic converter area.(No headers or replacement catalyst parts.)
    Praticipants need to be over 21 years of age with a valid drivers lic. and credit card.
    You will need to drive the vehicle to our South Orange County location(Rancho Santa Margarita)
    If you meet these requirement here is the program.
    I will need the truck for 3-5 days.
    We will supply you with a rental car for the duration of the R&D process.
    Vehicle usage will be slim if any we are not looking to drive or test the vehicles we just need to build a part off them.
    The vehicles will be fully covered by our insurance company while they are in our possesion and they will be kept inside at all times.
    Last but not least - For the usage of your vehicle we will supply you with a Magnaflow Performance Cat-Back system FREE OF CHARGE for your trouble.(We will install it while the vehicle is at the shop)
    Please shoot me some info or point a friend in my direction if you think they qualify.
    If you have any questions please feel free to email or call me at the shop!
    www.magnaflow.com
    Thanks
    Brandin Adams
    Product Development Coordinator
    Magnaflow Performance Exhaust
    badams@magnaflow.com
    949-858-5900 x3314

  2. #2
    hack job
    you got mail!

  3. #3
    JB in so cal
    Damn! I didn't misread that, did I? F-250 V10? Please tell me I did... :cry:

  4. #4
    LHC30Victory
    I don't believe in FORD's but I got a 96 chev 1ton crew w/a 7.4 that is "unmolested" if ya want to do the same delio :boxed:

  5. #5
    Havasubum
    i got a 98 jeep cherokee v6 that could use a new exhaust

  6. #6
    Cole Trickle
    Thanks for the replys.
    There is a possibility that all of the vehicles listed might be needed in the future.(F-250 V-10 and the 7.3 1ton chevy for sure)
    At this time we are concentrating on F-150's and 2005 model year vehicles.
    It would be great if you could visit our website with whatever vehicle you have and register it for development purposes.
    http://www.magnaflow.com/10projectvehicle/prototype.asp
    We are constantly looking at new projects or needing a vehicle for test fits.
    Thanks
    Brandin
    Magnaflow Exhaust

  7. #7
    spectras only
    I have a 96 Mustang GT . Just had the Maganaflow
    mufflers put on [sounds great ] .I could use some
    new cats [ 4 of them :wink: ] .

  8. #8
    AllMaxdOut
    I have a 98 Ford F150 and I work across the street from Magnaflow
    and would be interested in the test.

  9. #9
    Rev. Williams
    I have the new 2004 F-150 FX4 with only 23k miles on it..... Unmolested in the exhaust area except for a stage 2 Flowmaster muffler. It will look great in print adds also!!!
    Send me a PM if you're interested.
    http://www.***boat.com/image_center/...4FX4_Mine_.jpg

  10. #10
    Jetdriver
    I have the new 2004 F-150 FX4 with only 23k miles on it..... Unmolested in the exhaust area except for a stage 2 Flowmaster muffler. It will look great in print adds also!!!
    Send me a PM if you're interested.
    http://www.***boat.com/image_center/...4FX4_Mine_.jpg
    That things a piece of shit!

Page 1 of 3 123 LastLast

Similar Threads

  1. Free Exhaust logs
    By brwn234 in forum Jet Boats
    Replies: 4
    Last Post: 10-13-2008, 04:11 PM
  2. Another Free Gibson Exhaust.
    By ADDICTED in forum Sandbar
    Replies: 21
    Last Post: 09-27-2007, 11:07 AM
  3. Replies: 16
    Last Post: 03-31-2005, 01:37 PM
  4. Replies: 15
    Last Post: 03-11-2005, 09:32 AM
  5. Anybody use MagnaFlow Exhaust??
    By 100mbs in forum Sandbar
    Replies: 26
    Last Post: 09-14-2004, 03:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •