I'm wiring two JL Audio 300/4 amps and one JL Audio 1000/1 amp in my boat. I have read all the posts that I could find, but am not sure if I should:
1. Run three seperate 4 gauge power wires off the common terminal of the Perko switch directly to the amps ((which is within 10 inches of were the amps are mounted)) or
2. Run a seperate 0 gauge cable from the stereo batteries to a circut breaker, and then to a fused distribution block, ((Stereo batteries are approx. 4 feet from the amps)) Also if I run the 0 gauge cable from the stereo batteries, what size circut breaker should I use?
Thanx for the help