Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: WANTED:::: 15 X 30P set of cleavers

  1. #1
    the_gray_goose
    Anyone out there have a good set ( RH & LH ) of 15 X 28 pitch 3 or 4 blade clevers they would like to sell? must fit 300x's

  2. #2
    TOBTEK
    is be calling DREW at BoatMasters...he's the connection for Props!

  3. #3
    mbrown2
    Check scream and fly and offshore only....just got a matching set up 32x14.5 3 blade Mazco cleavers on Offshore Only...excellent shape for $700....little too big ...able to get on plane pretty quick, but only getting about 6K RPM's fully loaded with 4 people 2 ice chests and full of fuel..may have to lab them.

  4. #4
    Kilrtoy
    What are you running now....

  5. #5
    BoatFloating
    What are you running now....
    He's running 30p 15's 4B

  6. #6
    TOBTEK
    Check scream and fly and offshore only....just got a matching set up 32x14.5 3 blade Mazco cleavers on Offshore Only...excellent shape for $700....little too big ...able to get on plane pretty quick, but only getting about 6K RPM's fully loaded with 4 people 2 ice chests and full of fuel..may have to lab them.
    Have any of you "TWIN" guys ran smaller 28" props? how much top would you lose by going from a 30 or 32 down to a 28?

  7. #7
    BoatFloating
    Have any of you "TWIN" guys ran smaller 28" props? how much top would you lose by going from a 30 or 32 down to a 28?
    I run 28p 3 blades 14.50 but my taco wagon doesn't know speed. I want Gray Goose to try my props. I think it would be a rocket on the top end with the 3B instead of 4B...

  8. #8
    mbrown2
    Have any of you "TWIN" guys ran smaller 28" props? how much top would you lose by going from a 30 or 32 down to a 28?
    You would think it should be a rocket ship with smaller props....I run 28" 4 blades and they have good acceleration (non labbed), but can barely hit 98 with them....I would like to run the 32 with lighter load and see, but the most consistent number I have seen is 105 with the 30"'s 3 blade labbed...Also, the 3 blade throw some cool roosters....and I have not noticed acceleration did too bad with 30's or 32's..
    I would like to get a set of 28 3 blades and another 30" 3 blade since I lost a blade on one of my props.

  9. #9
    BoatFloating
    You would think it should be a rocket ship with smaller props....I run 28" 4 blades and they have good acceleration (non labbed), but can barely hit 98 with them....I would like to run the 32 with lighter load and see, but the most consistent number I have seen is 105 with the 30"'s 3 blade labbed...Also, the 3 blade throw some cool roosters....and I have not noticed acceleration did too bad with 30's or 32's..
    I would like to get a set of 28 3 blades and another 30" 3 blade since I lost a blade on one of my props.
    Daren heard that if you run motors up higher then you wanna go with 15's??? Have you heard this????

  10. #10
    mbrown2
    Daren heard that if you run motors up higher then you wanna go with 15's??? Have you heard this????
    I have not heard that, but my 4 blade 28's are 15's....I get pretty good pressure with the 14.5 or 15's...15's are a bigger wheel to turn...

Page 1 of 2 12 LastLast

Similar Threads

  1. cleavers for my mach26
    By dschifan in forum Cats & Tunnels
    Replies: 13
    Last Post: 10-10-2007, 09:23 AM
  2. Cleavers For My Mach 26
    By dschifan in forum Outboards
    Replies: 1
    Last Post: 10-06-2007, 04:04 PM
  3. Wanted 15"x32" 4 blade cleavers or larger
    By Bullhead Bully in forum Parts 4 Sale
    Replies: 3
    Last Post: 09-29-2007, 08:38 PM
  4. Wanted 15x32 or larger 4 blade cleavers
    By Bullhead Bully in forum Outboards
    Replies: 0
    Last Post: 08-23-2007, 04:48 PM
  5. Need Props!!! Cleavers and ETs
    By DCBDaytona in forum Cats & Tunnels
    Replies: 5
    Last Post: 08-22-2006, 07:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •