Total timing for a BBF 460

[Hydro-Thunder]

What would be a safe total timing to go with? the engine is running 10-10.5 to 1 compression and performer RPM cam?
and how fast do I want it to advance.
Jesse
[This message has been edited by Hydro-Thunder (edited June 06, 2002).]

[058]

Start with 36 deg. full in by 2800-3000. If thats a little lazy bump it up to 37-38. Haven't run across too many BBFs than need much more than that.

[hack job]

go with what 058 said that is spot on and should work out good for you! good lucka nd we will see you on the water! http://free.***boat.net/ubb/wink.gif
Tyson www.plumbersassracing.com (http://www.plumbersassracing.com)

[77charger]

I run a motor of similar specs i run a total of 38 seems best there also run a bottle too 100hp and dont back it down.fuel is 1/2 pump and race or 91 w/oct boost(turn down to 35-36)and have never had problems.

[Hydro-Thunder]

Thanks for the help I am putting in a nwe MSD distributor and wanted a starting point.
Thanks again
Hydro-Thunder