I just sent you a PM.
I stopped by to check on it today, and the paperwork is still not ready, but I had a chance to go over the boat again, and here is what I found (bear with me, I don't know all the "proper" names for V-drive parts yet):
Approx. 18' Glass over wood true flat bottom, no label's, stickers, or HIN #,
the glass is lifting and the plywood is coming apart, so the hull is junk. :yuk: :cry:
Halibrand Marine Products "V" box (forgot to check gear ratio, sorry)
Debold's 9 degree thru hull prop shaft housing (stuffer box??) with brass (edit) 3 blade prop, all driveshafts, crank flange, flywheel, etc. for a Chevy (had a SBC). V box turns freely, prop shaft is 1" diam. everything appears to be in decent shape
some sort of mickey mouse electric (edit) water pump set-up
Skag (belly fin) brass
full width trim plate w/stainless turnbuckles, (may keep for my Witchcraft project)
Nicson stringer mount throttle pedal and cables (definately keeping this for my Witchcraft project)
Thru hull exhaust tips (appear to be aluminum?)
full cable steering system w/brass (bronze?) rudder, steering head (what the wheel mounts on) , etc. Rudder is rigged with 2" pulleys on each stringer and an 1/4 round cable drive (edit) on the rudder. Steering moves freely.
Pic's posted below
Since I have no idea what this stuff is worth I will have to trust in everyone's honesty to come up with a fair price.
I know, "it's worth about $15 all together" right??? :devil:
If your interested in any of this stuff either post here or send me a PM and let me know what it's worth to you. All reasonable offers considered and buyer pays shipping.
I just sent you a PM.
Bump to the top, editied the parts list, should have it at the house today or tomorrow. Pic's will follow as soon as it gets here.
Sent you a PM
Here are the pic's (finally)
Steering parts (upper rudder shaft support not in picture) most parts are Nicson, complete from steering wheel to rudder:
http://www2.***boat.com/image_center...ing_system.JPG
V-drive and assoc'd parts (Halibrand Marine Products "V" box, Debold's 9 degree thru hull prop shaft housing, 1" dia. prop shaft, (all pieces from crank flange to prop nut are there)
http://www2.***boat.com/image_center...6driveline.JPG
Fuel tanks, steel (appear to be about 5 gallons each):
http://www2.***boat.com/image_center...66000_0245.JPG
The donor (boat no longer exists) year, make, model unknown, appeared home built, thin glass over wood:
http://www2.***boat.com/image_center...parts_boat.JPG
http://www2.***boat.com/image_center...rts_boat_2.JPG
TTT, one last time.
If interested in any of this stuff let me know otherwise it goes on E-bay on the 5th. I'm looking to get rid of it, so make me a fair offer and it'll probably be yours.