Results 1 to 3 of 3

Thread: help plz

  1. #1
    bob briley
    rebuilt my pulse fuel pump and the kit did not have both check valves in it . and the old ones 1 was missing might be in the old filter. so just used the plastic ones , ran like shit last sat and sunday could that be it or am i missing something

  2. #2
    Tom Brown
    I've always gotten both valves in fuel pump rebuild kits. Was the bag opened? It's a good idea to replace them.
    Running low fuel pressure on a 2 stroke engine is an extremely bad idea. The lower the pressure, the hotter the engine will run to a point at which you will melt holes in the pistons if it gets bad enough.
    Really... if the fuel pressure isn't correct... don't run the engine.
    Fix that pump, ASAP.

  3. #3
    bob briley
    did u get the rubber and plastic ones ?
    and it goes on retainer plastic rubber centerplate ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •