Ok I see that there are alot of people looking and selling parts and we had a few suggestions for it so here it is once againPlease post whatcha got and try to get some pics up because pics have a 1000 words
396
i have a AT reverse bucket along with an AT nozzle adapter and a polished berkley nozzle adapter also i have a 5/8 TPR berkley shoe.
prolly got more shit layin around too...
ohh ya i have a L 44 lifeline that needs recert........$350.00
pm me for info
Q
Lets see,
Gor a used but good condition Rattler balancer for BBC for external balance crankshaft. will include new decal from TCI for free. Ive got $150 in it.
Holley 750cfm with electric choke, Used good shape. $75 obo
Edelbrock Torker 2-0 intake. Dirty, would clean up well though, not abused. $50 obo
GM HEI distributor with Performance Distributors coil, cap, rotor, and module. $90 firm.
10 quart oil pan that came off my stock 454. Not sure what brand, looks like a stock pan that has been modified. Decent and it works. Comes with drain hose. $50
Starter for BBC. Stock, automotive type. Worked when I took it off.$50 obo
Aluminum foot pedal, floor mount. Good condition. $45obo
BBC flywheel, its heavy!. Make offer.
Ill post pics before the weekend.
i have a performer 460 intake-$50 a set of header braces powder coated grey-$50.00
1 yellow top optima battery brand new $100.00.
Used for 1 season, Auto Meter 2 1/16 Ultra Light Gauges
ATM-4303 Mechanical Blower Boost with install kit
ATM-4347 Electric Oil Temp with sender
ATM-4327 Electric Oil Pressure with sender
60.00 for set plus shipping
For more info Auto Meter Gauges (http://www.egauges.com/vdo_grou.asp?...tra-Lite&Cart=)
Brand new scoop from eddie marine purchased last week.
http://www2.***boat.com/image_center...2SCOOP-med.bmp
This air scoop is fabricated out of stainless steel and hand polished to a brilliant finish. Our scoops will fit Holley or Quadrajet standard four barrel carburetors with a 5 1/8 air inlet. This scoop is only available for single carburetor applications. The scoop is 5" tall (from the air horn base), 10" wide and 15 1/2" long.
ASKING 100..+ SHIPPING-------- RICH 323 646 4607 SOLD
1 Formuling / Grant 9 bolt steering wheel. 25 bucks +Shipping
http://www2.***boat.com/image_center...W_IMG_0698.jpg
1 3 3/8 Tach Bezel
1 3 3/4 Speedo Bezel (OD is same as 3 3/8 but center is bored out more)
6 2 1/16 Standard gauge bezels
3 Push Pull Bezels
3 Knobs Lights Bilge and Blower
1 Ignition key Bezel
The photos only show some of the stuff removed. The second shot is before I started taking my gauges out. I am still taking the other parts off my boat. All are in the same condition of slightly faded Red Anodized. I want 49.00 + Shipping. PM me if you want them and I will give you my paypal or street address.
http://www2.***boat.com/image_center...z_IMG_0697.jpg
http://www2.***boat.com/image_center...Hallett_7_.jpg
Bimini Top 75 Bucks. I think this is sold to Punisher
73 Wide
32 High
5 foot long
http://www2.***boat.com/image_center...m_IMG_0694.jpg
http://www2.***boat.com/image_center...m_IMG_0693.jpg
http://www2.***boat.com/image_center...m_IMG_0692.jpg
http://www2.***boat.com/image_center...allett_10_.jpg
Brendella,
Check your PM's. Is the intake RECT. ports or Oval.
Thanks.
T.J.
www.tjsperformance.com
REBUILT/NEVER FIRED HIGH PERFORMANCE 460
.030" overbore D1VE block
TRW L2443NF-30 forged pistons (13.2:1 c/r with current heads)
Speed Pro rings
Super Cobra Jet rods with floated pins
Polished internal balance crank
Clevite bearings
Melling CJ oil pump
Unported D0VE cylinder heads w/bronze guide inserts and 3-angle valve job
Crane valve springs
Crane roller rockers
Comp Cams rocker studs & guideplates
Moroso tall valve covers
Manley 3/8" pushrods
Howards solid lifters with laser lube hole
Comp Cams solid lifter cam .649I/.642E 270*/276*@.050" 108*LC
Cloyes True Roller timing chain
Melling CJ oil pump & front sump pan
Fluidamper included
This engine was first offered for $2950, then the price was dropped to $2750.
Reduced to $2650
http://home.earthlink.net/~checkwith...s/466motor.jpg
Serious inquiries only, please. Engine must be picked up in the Los Angeles area for this price. PM me for details.
__________________________________________________ _________
High Flow Dynamics 429/460 Quick Change Timing Cover Allows quick access for cam timing changes without removal of the cover.
http://www2.***boat.com/image_center...verMounted.jpg
http://www2.***boat.com/image_center...erOnCoverA.jpg http://www2.***boat.com/image_center...seAndCover.jpg
http://www2.***boat.com/image_center...inedEdgesA.jpg
Cast from virgin ingot aluminum, then heat treated
356-T6
CNC machined
Fits all types of 429/460 blocks (Passenger, Boss 429, A-460, Aluminum, etc)
Crank seal is externally servicable
Cam timing changes may be made without removing the timing chain case(Cloyes Hex-A-Just)
Camshaft changes may be made without removing the timing chain case (Milodon & Pete Jackson gear drives)
Accepts most cam-driven accessories
Available in Ford snout or Hemi snout front crank seal
Available as-cast and machined (shown above), cast/fully machined, or billet (special order)
May be polished, anodized, painted or powdercoated
Modular design. Options/Accessories include cam drive spud & hex drive, blower idler bracket, more (these items and more exist but are to be announced/available at a later date).
Stainless socket head cap screw mounting hardware is included
Jet Boaters: Cam drive accessory hole in the cam gear cover plate may be plugged with a 1-1/4" brass freeze plug.
Made In U.S.A.
Priced at $299 as pictured above, hardware included. Also, as an introductory bonus, these particular ones include the waterpump block off pads being drilled and threaded for 10-AN fittings. Future covers will not have this feature included except as an added cost option (drilling for fittings will be up to the end user in the normally produced cover).
__________________________________________________ _________
High Flow Dynamics Modified Melling Stage 1 Performance Prepped Oil Pump. Stage 1 oil pumps flow beyond that of the standard M84DHV. Our Stage 1 pump suits most engine builds, incorporates modified passages and the relocated bypass piston of our Stage 2 pumps, and utilizes any oil pump pickup tube for the rear-loading oil pumps like the M84DHV. Also, the Stage 1 pumps will now come with two spare stainless steel shims and one new bypass spring plug so that those who wish to "shim up" the oil pump pressure for their specific build will have the parts in hand.
http://www2.***boat.com/image_center...age_1_Pump.jpg
Stage 1 Oil Pump: $119.95
__________________________________________________ _________
We also have a large selection of C9VE, D0VE and D3VE heads in stock, cleaned and blasted and ready for portwork custom tailored to your specific build. Cleaned and blasted bare unported castings start at $299.
LO
OK, selling these for a friend. 2 22 gallon IMCO Tanks. 78" long. The neck is 12" from the front. They're 12" high, and 10" wide in the front and 6" in the back. The bottoms are radiused and 3" wide. $200 Obo
http://www.hotboatpics.com/pics/data...C00412-med.JPG
PM me if interested.
Posting Permissions
Reply With Quote