Here is the tag that is on the pump.
http://www2.***boat.com/image_center...icture_008.jpg
Can Anyone tell me about the Berk12JB pump.I can not find any info on this particular model pump.http://www2.***boat.com/image_center...icture_001.jpg
Here is the tag that is on the pump.
http://www2.***boat.com/image_center...icture_008.jpg
Here is a rear view
http://www2.***boat.com/image_center...icture_003.jpg
And an overhead view
http://www2.***boat.com/image_center...icture_006.jpg
OK, from the pic posted the suction housing is a "B", the bowl is a "C".
If you have any questions you can call me anytime,
Jim
Looks like it has a later model bowl on it and someone has added a hydraulic diverter. Also, by the marking on the tag, it looks like it has been into and the impeller was either cut to a "B" or had a different impeller installed("B"). Anything in particular you need to know?
Is thi a good pump or is it a combo of pumps.does this modle perform well?
So what i am undestanding is that it is amix of pumps.Will it perform well in this configureation.how do I go about getting parts for it,if I need to Rebuild.It came on the suposed 75 Tahiti hull I bought.
Your fine, but if you need anything I am just down the road.