Results 1 to 2 of 2

Thread: BBC Gen V & Gen VI oil system problem

  1. #1
    LynnsJet
    I recently had a bearing problem in my new Gen VI 496 blower motor. There was no obvious malfunction. A buddy of mine, Supersoaker466, provided me with the following links that solved the mystery.
    A $5. oil bypass change and the removal of another oil bypass is all the change that is required to fix the problem.
    Read it for yourself:
    http://www.offshoreonly.com/forums/s...ght=oil+bypass
    http://www.offshoreonly.com/forums/s...ght=oil+bypass
    http://www.offshoreonly.com/forums/s...ght=oil+bypass
    http://www.sdpc2000.com/
    In the last link to Scoggin Dickey, click on Contact Us, then Knowlege Base, then search Oil Bypass.
    Good luck. I hope this helps some of you. Note: It does not apply to Mark IV engines
    L J
    Thanks Supersoaker466 for sharing this information.

  2. #2
    supersoaker509
    Lynn....I'm not sure if this was your problem, but if you run a remote oil filter and oil cooler it is a must have.
    http://www.***boat.com/forums/showth...ght=oil+bypass

Similar Threads

  1. system one
    By Ralph Brunt in forum Gear Heads
    Replies: 1
    Last Post: 06-05-2006, 06:54 AM
  2. Problem Solved: System Works.
    By bear down in forum Audio
    Replies: 3
    Last Post: 08-18-2005, 03:19 PM
  3. My New System
    By BADASS38CHEVY in forum Audio
    Replies: 8
    Last Post: 05-20-2005, 05:04 PM
  4. Nos System
    By Blade1 in forum Jet Boats
    Replies: 13
    Last Post: 04-14-2004, 07:00 PM
  5. PCV system
    By roadagent in forum Bench Racers
    Replies: 15
    Last Post: 05-11-2002, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •