Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: NEED HELP!!!!

  1. #1
    blown540flattie
    I need help. I am looking for a waterpump that is driven off of the cam and had a drive for a enderly style injection pump. Does any one know who make them? And where i can get one?

  2. #2
    V-Drive Tom
    Blown540,
    Kuhl Products (MIKE KUHL) makes one. Works good, best to buy a new one, not used. ( they changed the sealing part on the newer ones.) It would be good to use the front cover they make for it also. 714-547-7071

  3. #3
    V-Drive Tom
    What I mean is the timing chain cover. That way all holes line up properly. Then your pump bolts right on to it!

  4. #4
    superdave013
    You can use any cover that is set up for an injector pump that has the 3 hole mounting pattern. I need an extension anyway so I used an Enderly extension. It has both the 3 and 4 bolt patterns on both ends.
    On my new engine I need a new cover so I thought the Old Kuhl River Rat would look nice. (they also make a billet one) The lower fins on the cover hit the balancer. I cut them off so it worked out ok.
    Here are some pics of the cover and pump. The one you need is the one in the middle.
    http://free.***boat.net/gallery/Gear..._and_cover.JPG
    http://free.***boat.net/gallery/Gear...ives/pumps.JPG
    While I was cutting the cover I enlarged the water inlets to 1/2" NTP.
    http://free.***boat.net/gallery/Gear...ront_cover.JPG

  5. #5
    blown540flattie
    Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!

  6. #6
    Costello
    Teague sells the Magnaflow pump (cam driven). It's a much nicer piece than the Neovane.

  7. #7
    V-Drive Tom
    Costello
    Read the guys question. We are not telling him to use a neovane pump. He needs to stack an injector pump on it. And if your buying a Magnaflow from Teague..?? Well I wont say the rest....

  8. #8
    GofastRacer
    Originally posted by blown540flattie:
    Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!
    Hey blown540, if it'l help, check out the pics of my Daytona, maybe give you some ideas....
    http://briefcase.yahoo.com/gofastracer

  9. #9
    Costello
    Tom you are right, I didn't read the question properly regarding his injection pump granted. Did I say you told him to use an Neovane? No, you told the guy to use the Kuhl, I copy that loud and clear. Thinking he was only looking for a cam driven pump, I'm just suggesting he stay away from the Neovane, that's all. Tom regarding your comment about Teague, NOT COOL. When Menkens comes up in a less than positive light, I jump right in defending your V-Drive company relentlessly, because I like you. Businessmen should support businessmen positively or remain silent In My Humble Opinion.

  10. #10
    V-Drive Tom
    Costello
    Criticism and Point taken. Sorry to get under your skin that bad. I waited for you to come back on that night. Then I was gone Vintage MotoCross Racing. It was late and...I wont say the rest...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •