Results Posted - NJBA 1st Race March

[Willis]

March 21, 2007
:jawdrop:
Hello People,
Just wanted to give the NJBA Staff props for being the best racing club in the world... Look at this results posted for the first race to keep you informed.
:sqeyes:
The NJBA leadership team has the right person in all its positions, track staff, officers, and offline personnel who do the web posting and all those who make this a great event every race!!!
Your positive comments are welcome
Willis

[BUSBY]

Gina is working on the points as we speak! Should have them done and over this afternoon!
Great job on posting the results Robert.
I second the comments Willis posted.
Racer227 (Shaun Harrington) and Nick Pirata (not sure of his screen name here or if I spelled his last name correctly), but the 2 new Tech guys rocked! They jumped in with a great attitude and made it work!
We could still use a couple more full time guys, PM me your information & I'll pass it on to Shaun.
Thanks again guys, great job!

[onsite_pc]

The points are up now....
Tom Papp Memorial Season Opener...Points (http://www.njbaracing.net/points/points.php)

[UBFJ #454]

Hey, there must be some 'Kinda Mistake' in the UBFJ Postings ... I don't see any 7 Second Boats other than Jerry ... What happened to all the 7.70'er's that people said over the winter break that they were going to bring? :sqeyes:
All that talk 'Scared' us so bad that we figured it was a waste of money to go that far just to come over and get 'Whooped' by you Cali Guys.

[Willis]

Jak,
Has this ever happen to your team?
http://img.villagephotos.com/p/2002-...9/149Bowl1.jpg
What are the over all fixs for this
Willis

[Cs19]

The 10.0-14 sec brackets are not posted, will they be updated?
Thanks.

[UBFJ #454]

Jak,
Has this ever happen to your team?
http://img.villagephotos.com/p/2002-...9/149Bowl1.jpg
What are the over all fixs for this
Willis
Not the bowl ... blew the side out of the old Berkeley suction piece couple of years ago. I was trying an 'Odd' (to say the least) shape in the intake entry area and that combined with the loader caused a severe hammering effect that blew out the side of the Berkeley piece ... turns out there also was a significant core shift in the casting in the area that gave out ... that, my experimentation and the fact that the suction piece was over 25 years old and had been run hard (suspect metal fatique) are what led to the failure.
The way we corrected our problem was to change to a Dominator suction piece (thicker, higher quality casing with side reinforcement), redo the intake area and redesign the loader(s) to compliment the shape of the redone intake area ... Trite to say in hindsight, but, I've found that matching the loader and intake entry area is one of the key elements to keeping the pump fully loaded throughout the 1/4 ... and, sometimes your adjusting each of those things less than a few tenths of an inch at a time to get the 'Sweet' Set Up.
Jak

[steelcomp]

The 10.0-14 sec brackets are not posted, will they be updated?
Thanks.
10.00 - 10.49
1 Chris Starkweather White Knight #232 310
2 Sam Villavencencio Fire Me Up #097 205
3 Bob Prigmore Abracadabra #298 200
4 Jeff Smith Place Your Bet #417 150
4 Rolf Sammons License 2 Thrill #002 150
4 Steve Herr Getting Rowdy #150 500
10.50 - 14.00 still isn't posted.

[Johnwithjm]

10.00 - 10.49
1 Chris Starkweather White Knight #232 310
2 Sam Villavencencio Fire Me Up #097 205
3 Bob Prigmore Abracadabra #298 200
4 Jeff Smith Place Your Bet #417 150
4 Rolf Sammons License 2 Thrill #002 150
4 Steve Herr Getting Rowdy #150 500
10.50 - 14.00 still isn't posted.
Wow you get 500 points for 5th

[Cs19]

10.00 - 10.49
1 Chris Starkweather White Knight #232 310
2 Sam Villavencencio Fire Me Up #097 205
3 Bob Prigmore Abracadabra #298 200
4 Jeff Smith Place Your Bet #417 150
4 Rolf Sammons License 2 Thrill #002 150
4 Steve Herr Getting Rowdy #150 500
10.50 - 14.00 still isn't posted.
I mean results Scott.