Cp performance has them Part 410-280173 or 410-280174. Part numbers for both the hypen is needed when you type them in.
I have a set of Gil 4" angle cut exhaust tips and need to get a replacement flapper for one of them. I check Rexmar.com and cpperformance.com and they were not listed under the search. Any suggestions?
Cp performance has them Part 410-280173 or 410-280174. Part numbers for both the hypen is needed when you type them in.
Cp performance has them Part 410-280173 or 410-280174. Part numbers for both the hypen is needed when you type them in.
Thanks, but I need the ones that look like this: http://www.cpperformance.com/detail.aspx?ID=357 I don't know if these will fit the 4" Gil exhaust or not. Brendan
Are you running the Gil composite exhaust tips with the stainless steel extensions?
If so you are out of luck on factory replacement flappers as the composite tips were discontinued 3-4 years ago.
I bought a sheet of the high temp rubber used for flappers and cut my own, Worked great!
Your other option is to cut the slash off and make it a straight-tip. Then you could run the external ones:
http://www.trickmarine.net/images/pr...ges/ACF11A.jpg
If you like the looks of your slants and don't want to give that up, this option does not apply.