Billet outdrive resevoir

[wan hung lo]

I have billet resevoirs for my outdrives. The glass is pulling away from the aluminum. Anyone have a suggestion for clear epoxy that will stick it back together. Thanks, Jeremy.

[Pussywhippled]

What brand are they?

[dumbandyoung]

I have billet resevoirs for my outdrives. The glass is pulling away from the aluminum. Anyone have a suggestion for clear epoxy that will stick it back together. Thanks, Jeremy.
If they are IMCO, the inspection tube is made of plastic not glass and held on with 1/2 fittings.
They use two different types of fittings depending on polished or powder coated res. You can call IMCO or any hardware shop and get a new tube.
If they are Teague's or another brand; I have no idea how they are assembled and how to fix them. I wouldn't use an epoxy, I would get the new part to make it work correctly.
It sounds like a defect to me anyways. You might even try sending them back.

[wan hung lo]

The glass on these are a sealed unit and are glued to the aluminum. http://revolutionmarine.com/shopsite...eservoirs.html