New TX-19 MOLD

[gunslinger]

Anyone check out the new mold on the youngblood website? It's sweet. Look under readers write by Ervin Capps.

[Shark Attack 065]

Thats a buddy of mine here in Lubbock , they are picking up the molds next month and should start building some soon !

[fleetimus]

Sweet!!!!!!!!!!!!!!! It would be nice to have a new TX!!!!!!!!!!!!!!!!!!! But. I will probably have to be happy with my 86.

[Gearhead]

I have a write up from Ervin on RPM Marine's new TX-19 molds that I have not yet put on the site. In the mean time here are a few of the newer pictures he sent me.
http://www.youngbloodjetboats.com/pics/molds.jpg
http://www.youngbloodjetboats.com/pics/molds2.jpg
http://www.youngbloodjetboats.com/pics/molds3.jpg

[TRG]

I can see that those are gonna have alotta lift, judging by those center lifting strakes!

[Shark Attack 065]

I can see that those are gonna have alotta lift, judging by those center lifting strakes!
Good eye

[TRG]

Do the old molds have the same bottom or is that an additional modification?
I just finished restoring a CanAm witch, i was told is a splash of the TX-19 is there any difference?...because if i am not mistaken, the center lifting strakes are not back as far as the one in the above pic.

[gunslinger]

I have a write up from Ervin on RPM Marine's new TX-19 molds that I have not yet put on the site. In the mean time here are a few of the newer pictures he sent me.
http://www.youngbloodjetboats.com/pics/molds.jpg
http://www.youngbloodjetboats.com/pics/molds2.jpg
http://www.youngbloodjetboats.com/pics/molds3.jpg
How about posting the write up?

[OverKill]

Just want to know how long do you keep the lay up in the molds. At least a week I hope.

[Cs19]

Looks like a typical gullwing to me.