Thats a buddy of mine here in Lubbock , they are picking up the molds next month and should start building some soon !
Anyone check out the new mold on the youngblood website? It's sweet. Look under readers write by Ervin Capps.
Thats a buddy of mine here in Lubbock , they are picking up the molds next month and should start building some soon !
Sweet!!!!!!!!!!!!!!! It would be nice to have a new TX!!!!!!!!!!!!!!!!!!! But. I will probably have to be happy with my 86.
I have a write up from Ervin on RPM Marine's new TX-19 molds that I have not yet put on the site. In the mean time here are a few of the newer pictures he sent me.
http://www.youngbloodjetboats.com/pics/molds.jpg
http://www.youngbloodjetboats.com/pics/molds2.jpg
http://www.youngbloodjetboats.com/pics/molds3.jpg
I can see that those are gonna have alotta lift, judging by those center lifting strakes!
I can see that those are gonna have alotta lift, judging by those center lifting strakes!
Good eye
Do the old molds have the same bottom or is that an additional modification?
I just finished restoring a CanAm witch, i was told is a splash of the TX-19 is there any difference?...because if i am not mistaken, the center lifting strakes are not back as far as the one in the above pic.
I have a write up from Ervin on RPM Marine's new TX-19 molds that I have not yet put on the site. In the mean time here are a few of the newer pictures he sent me.
http://www.youngbloodjetboats.com/pics/molds.jpg
http://www.youngbloodjetboats.com/pics/molds2.jpg
http://www.youngbloodjetboats.com/pics/molds3.jpg
How about posting the write up?
Just want to know how long do you keep the lay up in the molds. At least a week I hope.
Looks like a typical gullwing to me.