tpr edge stealth

[Cs19]

Where is the bottom of the droop in relation to the ride plate? With the longer droop it may hang below the plate and that wont work. Most low profile setups like Miersch need a mini droop.

[blue wonder]

Where is the bottom of the droop in relation to the ride plate? With the longer droop it may hang below the plate and that wont work. Most low profile setups like Miersch need a mini droop.
cs is a 100% correct...i have a stealth also with an aggressor intake...which is the same as a meirch and with the long droop it ever so slightly is hanging below the ride plate...i still run it today but im not saying its the best thing...try it and see what happens...if you want to achieve the same lift as a long droop with a short one just use a wedge to get the same amount of
up....a back-cut shoe will also help with overall lift but be carefull...i was running a 1/2 degree taper and went to a 1 degree back-cut and the boat blew the tail about half track...wasnt pretty...might try a 1/2 degree first...thats what im going too.

[TRG]

Dipshit here! i thought he was referring to a 21'
"Nothing to see here,...move along"!

[Cs19]

i was running a 1/2 degree taper and went to a 1 degree back-cut and the boat blew the tail about half track
Going from taper to back cut will not cause overcharging or blowing the tail. You must have changed the biting edge depth or the opening size on the shoe.

[djdtpr]

Going from taper to back cut will not cause overcharging or blowing the tail. You must have changed the biting edge depth or the opening size on the shoe.
Exactly what i said when he told me the other day but he said he didnt change anything at all and tryed it a couple times and got the same result.I know when i tried the three degree that you had on mine it just started scooting the back of the boat around alot but was a really cool feeling ride.

[blue wonder]

Going from taper to back cut will not cause overcharging or blowing the tail. You must have changed the biting edge depth or the opening size on the shoe.
nope...i made sure shoe depth and mouth opening were the same...it wasnt overcharge it was only at 40 lbs when it did it.

[blue wonder]

we got video of it...no warning just all of a sudden blew the tail out of the water.

[bp]

many years ago, when i first tried my 3 degree b/c shoe with the biting edge at the same depth as the 2 degree, the boat threw itself out of the water at 3/4 track (and almost out of the lane). but it was a lot quicker up to that point... . but data showed that it didn't blow the tail. i DID blow the tail a couple years ago at firebird a year and a half ago, which the data showed. blowing the tail was not much compared to the first one.
if you blow the tail, you lose forward momentum and the bow will tend to plant until suction is restored. as soon as it happens, you kind of know something isn't as it should be so you tend to back off.
i've run the 3 degree several times since then with no problems.

[delirious]

what happen when you blow the tail and what makes it happen

[bp]

what happen when you blow the tail and
what happens? bowl pressure (thrust) falls off to nothing, or next to nothing, while suction pressure is still rising.
what makes it happen
several things have to occur to make it happen. shoe too deep and/or too much loader at too much speed, results in too much (and rising) suction pressure, and excessive lift at the same time.
also, just because several factors might align doesn't mean the tail will blow. excessive lift just get's the boat very loose. the difference is, when bowl pressure falls off, it's like the brakes were hit, then released as bowl pressure comes back.
when i did it, i was told it looked ugly, but it didn't feel all that bad.