Page 1 of 4 1234 LastLast
Results 1 to 10 of 39

Thread: 1958 392 Hemi

  1. #1
    napabob
    I am searching for Nicson marine hardware to install a Chrysler Imperial 392 HEMI engine.
    Nicson rear engine mount (aquired used, eBay)
    Rear engine mid plate (aquired used, from Chuck Taylor's HEMI store)
    Nicson front engine mount
    Nicson exhaust logs and elbows (aquired from Bobbo541 with risers)
    Exhaust elbows donated by Sanger Pete (thanks a bunch!)
    http://www.hemiengineparts.com/index.html (http://)
    http://www.hotboatpics.com/pics/data...alleyCover.jpg
    http://www.hotboatpics.com/pics/data...263Sanger1.jpg

  2. #2
    YeLLowBoaT
    There is a set of mounts on ebay about every 2 weeks or so...
    Almost always nicson... now the logs are alittle rarer... and the risers.... I've been looking for almost 18 months to find a pair of nicson risers for my pontiac ( same size as the hemis) you can also check boat wrecking yards its amazig what you can find....

  3. #3
    Senior Member
    Join Date
    Jan 2012
    Posts
    1,863
    I was watching some hemi boat stuff on ebay. Both of these sold within the last week or so.
    Stuff seems to be out there.
    http://cgi.ebay.com/ebaymotors/V-DRI...1285QQitemZ459 7664954QQrdZ1
    http://cgi.ebay.com/ebaymotors/Edelb...QQitemZ4595872 957QQrdZ1
    http://cgi.ebay.com/ebaymotors/Hemi-...202QQitemZ4594 638928QQrdZ1QQsspagenameZWDVW

  4. #4
    Cas
    there's a boat yard in Rancho Cordova that has all kinds of stuff. I can't recall the name of it but email Oldsquirt, I'm sure he'll know. That is if you don't know about it already.

  5. #5
    napabob
    I was watching some hemi boat stuff on ebay. Both of these sold within the last week or so.
    Stuff seems to be out there.
    http://cgi.ebay.com/ebaymotors/V-DRI...1285QQitemZ459 7664954QQrdZ1
    http://cgi.ebay.com/ebaymotors/Edelb...QQitemZ4595872 957QQrdZ1
    I watched those auctions. I was not familiar with the Cal Marine stuff and the Edelbrocks did not have the risers (snails).
    I did manage to pick up some Nicson front and rear engine mounts, the rear engine mount was the piece that I was hoping was in usable condition for its age, but the holes for one of the stringer mounting adjuster plates were hacked up. Both stringer adjusting plates are Nicson, but they appear to be for a different year engine mount. The webs were ground down to clear some of the protruding features of the engine mount. The coupler was the only part that was not damaged by improper home machining. I wil have to see if I can repair the rear engine mount. The front engine mount was listed as being altered and would not fit into a restoration project. If I can't fix the front engine mount I will have to look for another one. I will have to be more careful of items offered on eBay.
    http://cgi.ebay.com/ebaymotors/ws/eB...3ARTQ%3AUS%3A1

  6. #6
    Jeanyus
    there's a boat yard in Rancho Cordova that has all kinds of stuff. I can't recall the name of it but email Oldsquirt, I'm sure he'll know. That is if you don't know about it already.
    The boat salvage yard is called shipwreck.

  7. #7
    Junior Member Hud's Avatar
    Join Date
    Dec 2010
    Posts
    3,628
    A friend of mine has everything you need, I'll give him a call if you like. We are in Yuba City, home of Kung Fu BBQ sauce...C'mon!

  8. #8
    napabob
    There is a set of mounts on ebay about every 2 weeks or so...
    Almost always nicson... now the logs are alittle rarer... and the risers.... I've been looking for almost 18 months to find a pair of nicson risers for my pontiac ( same size as the hemis) you can also check boat wrecking yards its amazig what you can find....
    I found a set of Nicson exhaust manifolds at Chuck Taylor's without risers. Glenwood Marine has some risers that are made for the Chrysler wedge engine exhaust manifold they carry, They said that I might be able to adapt that riser model to the Nicson's. The flange is 4-7/8" diameter with a 3" exhaust outlet. The flanges are undrilled so that you can custom set them.
    http://www.glenwoodmarine.net/Catalog/MANIFOLDS.pdf

  9. #9
    napabob
    A friend of mine has everything you need, I'll give him a call if you like. We are in Yuba City, home of Kung Fu BBQ sauce...C'mon!
    That would be great. I would like to know what he has.

  10. #10
    napabob
    The boat salvage yard is called shipwreck.
    Shipwreck Marine
    2540 Grennan Court, Space 'C'
    Rancho Cordova, CA 95742
    (916) 635-1945
    Thanks a bunch guys! I will give them a try.

Page 1 of 4 1234 LastLast

Similar Threads

  1. Looking for 1958 392 HEMI Nicson hardware
    By napabob in forum Parts 4 Sale
    Replies: 3
    Last Post: 02-12-2007, 10:42 AM
  2. 1958 Harley Duo Glide
    By TRIMM MANN in forum Sandbar
    Replies: 4
    Last Post: 09-27-2004, 09:26 AM
  3. Hemi Ram
    By GottaJet in forum Sandbar
    Replies: 7
    Last Post: 05-14-2004, 02:02 PM
  4. Hemi Ram
    By GottaJet in forum Sandbar
    Replies: 17
    Last Post: 04-26-2004, 05:39 PM
  5. 1958 Brendella
    By Craig in forum Sandbar
    Replies: 10
    Last Post: 04-03-2004, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •