I took my 1.5 liter honda motor to westech today. It dynoed at 900 hoprespower! Damn, those guys at westech really know how to wake up a stock CRX motor. It was $600 well spent in my opinion!!!!
*Just messing with you guys!!!!!!!
78Eliminator:
I took my 1.5 liter honda motor to westech today. It dynoed at 900 hoprespower! Damn, those guys at westech really know how to wake up a stock CRX motor. It was $600 well spent in my opinion!!!!
*Just messing with you guys!!!!!!!
Blown 472:
Was the dog wif you?? I heard they dig dynos. He doesn't like loud noises. I have a feeling he's going to take a while to get used to running around in a jet boat.
In fact, I think the little guy is sick. Hasn't really been finishing his 1/2 cup of food for the last couple nights.
78 you are sooooooooooo full of shit, I had my 1.3L buzz bomb motor on there and after I smacked the fuel pressure reg wif a hammer and socket it upped the fuel in the rails and made 975hp at 12,000 rpm, 110 degree day and 20.10 baro.
Damn Blown those are Badass #### eek!
just think what HP you will get on the Juice jawdrop
I am working on the nos system right now, dual stage dry system, soon as I get a bigger fuel pump I am going to put foggers in the throttle body and each port, I am going to 90lb injectors and going to advance the cam, should net bout 245 hp.
Blown 472:
I am working on the nos system right now, dual stage dry system, soon as I get a bigger fuel pump I am going to put foggers in the throttle body and each port, I am going to 90lb injectors and going to advance the cam, should net bout 245 hp. If you let westech do it it would be more like 1245H.P.
I am going to run a T-4 turbo with 40 lbs of boost, then get a 500hp shot of nitrous. I am running a stock crank and rods, but westech will set it up so it wont grenade.
Here is what I plan to do with the nitrous: I'm going to have three bottles in the hatchback of the crx, all in bottle blankets. I will daisey chain all the bottles to a gate valve that will be next to the shifter (I saw it in Mad Max so I know it can be done), then I will run a 12-an line from the gate valve to the throttle body. I am just going to weld the -12an hose to a hole I cut in the throttle body. When some dude steps up at the stop light, I will open tha gate valve and hammer it!!!!!!!!!!!!! I bet I will do a 3 second et in the 1/4. **** YEAH BRO!!!!!!
Whata you think they can get out of my 2.3 Chain Saw ?
Those numbers aint shit! Wait till you see my 1991 Vw Vanogon with a t28 turbo porsche 911 motor with a wheely bar. That things gonna smoke. Look out Honda boys I can spank you at the track and bang your girls in the back.
This is what happens when everyone leaves for OP6 but us.
Posting Permissions
Reply With Quote