It's not silicone, it's an epoxy putty. It's called "Seagoing".
whats kinda silicone it used between the grate and the fiberglass?
It's not silicone, it's an epoxy putty. It's called "Seagoing".
I use a 3M clear silicone to "bed" the loader on my Schiada. I drilled the 1/4-20 mounting holes out, drilled for 5/16 and set SS thread inserts into the suction piece. Drilled through the suction piece to be able to add nuts and washers to the bolts. I did drill right through my oil pan on the first one! What a lesson.
whats kinda silicone it used between the grate and the fiberglass?
Are you speaking about the intake grate or intake itself?
Usually, when people speak of the "grate", they are speaking about the loader which bolts into the location where the rock grate was.
If you are speaking about the intake that bolts inbetween the pump's suction piece & hull, it is installed into the hull installed with epoxy.
A little clairfication of which piece you are asking about would help.
Are you speaking about the intake grate or intake itself?
Usually, when people speak of the "grate", they are speaking about the loader which bolts into the location where the rock grate was.
If you are speaking about the intake that bolts inbetween the pump's suction piece & hull, it is installed into the hull installed with epoxy.
A little clairfication of which piece you are asking about would help.
he's just talking loader busby.
steve, silicone adhesive is fine.
he's just talking loader busby.
steve, silicone adhesive is fine.
cool ...
and yup, clear silicone is fine.
Actually he is talking about the intake itself. Notice he said "between the grate and the FIBERGLASS". A loader does not contact the fiberglass in any way shape or form, but the intake does, which means he's speaking of the intake.
Actually he is talking about the intake itself. Notice he said "between the grate and the FIBERGLASS". A loader does not contact the fiberglass in any way shape or form, but the intake does, which means he's speaking of the intake.
nope still talking about loaders, he's got a 12je pump there is no intake
On an E or F Series pump, the grate DOES go up against the fiberglass.
DO NOT use Sea Going Poxy Putty on them. Use silicone.
nope still talking about loaders, he's got a 12je pump there is no intake
Aah! Learn somethin' new everyday!