Results 1 to 4 of 4

Thread: Engine Hatch

  1. #1
    JENKDICK
    Not real mechanically inclined so i am not sure how this thing works but my problem is when i bought my 2002 ultra 21xs the hatch lift which is a black rod, i believe screw design wasnt attached to the bottom of the hatch. the pin was pulled and it was leaned against the back seat. my buddy and i put the pin back in, then hit the button to lift the hatch and it worked fine both opening and closing. the last time i took the boat home from the lake the lift wouldnt open the hatch so i pulled the pin and propped the hatch open to get a better look. the top of the lift which has the hole for the pin will turn but the rod wont come out of the lower assembly. any ideas on what i should look for when i pull the whole thing out of the engine bay?

  2. #2
    Senior Member
    Join Date
    Aug 2009
    Posts
    454
    Make sure you have 12 volts across the two wires when you press the hatch button, it will switch polarity
    when you move the button the other direction.

  3. #3
    JENKDICK
    thanks for the reply bud. i will check that out.

  4. #4
    P-Money
    If the actuator is shot and you need a one....I've got one for sale in the SPAM section. Search for "eddie marine linear"

Similar Threads

  1. -Engine Hatch-
    By Bense468 in forum Sandbar
    Replies: 0
    Last Post: 06-20-2006, 03:22 PM
  2. engine hatch Accelerators
    By bigkyle in forum Sandbar
    Replies: 4
    Last Post: 03-12-2006, 04:54 PM
  3. Need Engine hatch reupholstered....
    By NOTALENT in forum Sandbar
    Replies: 25
    Last Post: 06-23-2005, 09:38 AM
  4. engine hatch actuators
    By doesitfloat? in forum Sandbar
    Replies: 4
    Last Post: 05-19-2005, 07:54 AM
  5. Engine Hatch
    By Waldo in forum Sandbar
    Replies: 4
    Last Post: 01-10-2004, 09:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •