Well I finally had some time to upload some pics.
Damn wire and fuses aint cheap
http://www.***boat.com/image_center/...84IMG_7143.JPG
I mounted my amps in the single berth. Luckily the panel had about 2" of space behind it to hide all the wires,
http://www.***boat.com/image_center/...84IMG_7147.JPG
Finished with amps
http://www.***boat.com/image_center/...84IMG_7228.JPG
I pulled 175' of new twiste 12G speaker wire. All MB quart componets had thier crossover mounted with SS screws. What a bitch in a boat.
Front speakers in the open bow.
http://www.***boat.com/image_center/...84IMG_7146.JPG
At the helm
http://www.***boat.com/image_center/...84IMG_7145.JPG
The rear ones I did the Pce-216 in coaxial as I was dealing with the vinyl. Every 6.5 that I replaced I had to make the hole bigger. I wanted the speaker as flush as it could go. I did not want the spacer ring holding the grill out. A lot of work. but I'm happy.
http://www.***boat.com/image_center/...84IMG_7141.JPG