Needed 35t & 34t 1/2 pitch pulley

[ColeTR1]

Anyone have one for sale?

[cal***boat]

Originally posted by ColeTR1
Anyone have one for sale?
We switched to 13.9mm drive and have alot of old 1/2 pitch pulley's in the shop.
If I remember right there is a difference between the top and bottom pulleys.
Do you need them for the blower drive or the crank hub ?
Let me know and I will check for you.
Dave

[Blown 472]

They should be the same unless you are using a mopar bolt pattern hub. Whatcha got?? I am looking for a 36 or 37 bottom.

[cal***boat]

I know that some of the pulleys we got have 2 of the bolt holes closer to each other so the it can only bolt up one way.

[Blown 472]

I think you can have them milled, the pullies I have, have a slot for that reason.

[superdave013]

come one, time to step up to 8mm
You can do it here (http://cgi.ebay.com/ebaymotors/ws/eB...ory=33741&rd=1)
And here! (http://cgi.ebay.com/ebaymotors/ws/eB...ory=33741&rd=1)

[blownmoney]

i have a 34t ? trade for a 36t?

[wideopen545]

ive got a 35 tooth 1/2 pitch off a weiand blower in great shape
540.427.2090
thanks tim

[wideopen545]

bump