Originally posted by ssmike
BBT -
Could you post some info about that FORD??? Looks like an early F.E.
Mr. BBT, look down at the side of the block and P.M. if you see three (I think 9/16ths or 5/8s in?) bolts spaced about three inches apart just above the oil pan line!!! Jerry
Originally posted by V-DRIVE VIDEO
Looks like an early F.E.
Mr. BBT, look down at the side of the block and P.M. if you see three (I think 9/16ths or 5/8s in?) bolts spaced about three inches apart just above the oil pan line!!! Jerry
There is 4 bolt holes just above the oil pan on the right (passenger) side only, 2 towards the front and 2 towards the rear. They are about 3" apart. On the left side there is an oil filter up front.....but no bolt holes
Originally posted by BigBoyToys
There is 4 bolt holes just above the oil pan on the right (passenger) side only, 2 towards the front and 2 towards the rear. They are about 3" apart. On the left side there is an oil filter up front.....but no bolt holes I don't think thats what we're looking for. I think this is most likely a 390. How hard would it be to put a speed wrench on the valve covers a post a pic of the rockers?
Here is the only numbers I can find on the block;
BSME6015D
9G21:1
LL
I can't find anything that tells me what it is so if anyone knows what it is for sure, speak up
The exhaust ports are different too....1 bolt on top, 1 on bottom.
I'm pulling the valve cover off now.
Originally posted by BigBoyToys
Here is the only numbers I can find on the block;
BSME6015D
9G21:1
LL
I can't find anything that tells me what it is so if anyone knows what it is for sure, speak up
The exhaust ports are different too....1 bolt on top, 1 on bottom.
It's a POS just like all the rest of it
Post the #s on the heads. They are midway on the head (between and just above) the inside sparkplugs. You can see these with the valve covers on.
Ok, numbers on the heads are B9ME-6090-B
and here's a few pics
http://www.pritek.net/forsale/valves.jpg
http://www.pritek.net/forsale/valves1.jpg
BBT check your pm's