I've got the headers all welded up and the turbos bolted on. Now I'm ready to build the intercooler. I found a new heater core for a bus that looks like it will work good for an intercooler core. It's 13 1/2 " x 8 1/2" x 3 3/4" thick with copper fins and brass tubes. I got it from a local radiator shop. I think he wants about $ 50 for it. I'm going to build an aluminum box around it and it will mount down to the top of the Victor 4 bbl intake.
[img]http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/Turboinstallation8.JPG[/img]
I need to find where to get those air cleaners that clamp right on the turbo compressor inlet. I've seen some that were a bell shaped unit with a coarse screen over the end.