Stereo Install....

[1stepcloser]

A few more shots....
The rear bench, installed....
http://www.***boat.com/image_center/...ts_032-med.jpg
The left side, Rockford Power series 400.4....
http://www.***boat.com/image_center/...ts_037-med.jpg
The head unit...that is supposed to be in a Rons Custom Detail housing....which arrived too late to my house, (thank you UPS) and now the hole is too large...
http://www.***boat.com/image_center/...ts_039-med.jpg

[1stepcloser]

Some other stuff that was going on over the winter.
I wanted as little wiring and periphials as possible to be seen, all the battery cable was replace with #2 gauge throughout, and was run behind all the panels
A shot of the Perko switch and Magnetic circuit breakers. Panel is 1/8" aluminum plate, polished. It's mounted on the back side of the seat base.
http://www.***boat.com/image_center/...ts_036-med.jpg
The back side of the panel... The cables exit the bench on the right of the photo, then are routed under the floor, bundled in a nylon sleeve.....
http://www.***boat.com/image_center/...ts_011-med.jpg
The cables exit the floor, through PVC fittings, between batteries 1 & 2 where they are routed to their proper locations.
http://www.***boat.com/image_center/...ts_033-med.jpg
The end is a clean uncluttered area for the batteries. (the two cables seen have since been routed together....)
http://www.***boat.com/image_center/...ts_034-med.jpg
A new fuel fill tube was fabbed from stainless, it replaces the old black hose, and looks a little better as well. In the foreground of the picture is the aluminum frame that holds the Coleman stainless ice chest in place.
http://www.***boat.com/image_center/...l_tube-med.jpg

[Havasu Hangin']

That is very solid...it looks like you are one step closer to Havasu.
Can't you just make the hole smaller?

[Tom Brown]

Great looking install.

[RiverPirate]

It looks pretty F-ing awesome to me so far. Nice work!

[Whipped Caliber]

Nice Job 1stepcloser!!!!!1 How's it sound?

[1stepcloser]

Originally posted by Whipped Caliber
Nice Job 1stepcloser!!!!! How's it sound?
Thanks!
It sounds great! I havent had it out yet, thats next weekend, and I have only had it on inside the "tent" that its stored in, so I need to tune it when its out at the lake, but so far I am really pleased with the results. I do know that I can rattle the neighbors windows pretty badly though.....
This weekend gotta detail the thing, charge the batteries, and then off to Havasu!!!

[phuggit]

1step
That is some very clean looking rigging. Are you going to make it to the regatta next weekend? I'd like to see your boat, maybe pirate sum ideas.
I've got a 230 eagle also. If you can make it next weekend, the first round is on me. After five months of bustin your ass in the garage I'm sure you could use a frosty one.

[1stepcloser]

Oh hell yeah, I'm going to be there Thursday AM, through Monday. I'll be at Crazy Horse.
Definatley hook up, I could use a beer.
I'll be in the channel friday, likely Thursday as well, that or the sandbar! Look me up, secong round's on me.
Post a pic of your boat.....

[cruser]

How long is the drive from L.A. to Havasu? Thinking about going since I will be that far on that weekend.
cruzer