Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Whipple pricing

  1. #1
    HP350SC
    Hey infomaniac,can you still get a deal on a Whipple?I'm ready to buy the stage 3 kit in polished or blue for a carbureted HP500.Also their kits say complete with hoses etc.-does it have hardware and fittings to plumb the intercooler too?

  2. #2
    Infomaniac
    Yes I can get a deal. Whatever they say in the ad (site) is true. Let me check with Dustin on the intercooler stuff.

  3. #3
    HP350SC
    Great!-thanks.Not sure if I need the 2.3 or 3.3...motor is stock (70hrs.) I am replacing valve springs and head gaskets-possibly cam if perfomance gain can be expected with stock heads and manifolds.Would prefer the polished kit if not too pricey.

  4. #4
    HP350SC
    Info-tried to PM you from work but error message. Will try again at home.

  5. #5
    Infomaniac
    The 2.3 is a bit small for that engine. You really need the 3.3
    A cam upgrade would help but the best upgrade would be to put a Dominator on it. The stock 800 is a bit small.
    All of the cooling lines are included but you will need to come up with fuel lines.
    The stock kit comes blue and polish is an additional 800.00
    Check PM for prices.
    You will not be dissapointed !! Whipples pull like crazy.
    Ron

  6. #6
    jackpunx
    Infomaniac:
    The 2.3 is a bit small for that engine. You really need the 3.3
    A cam upgrade would help but the best upgrade would be to put a Dominator on it. The stock 800 is a bit small.
    All of the cooling lines are included but you will need to come up with fuel lines.
    The stock kit comes blue and polish is an additional 800.00
    Check PM for prices.
    You will not be dissapointed !! Whipples pull like crazy.
    Ron thats the upgrade I have.. LMK if you want to come down and go for a ride.. This way you can see what your getting into... I have talked to you.. if you go for a ride .. there will be no turning back..

  7. #7
    HP350SC
    Al'coleholic- your message box is full.

  8. #8
    JLaughreySS24
    Jackpunx, Thats the same set up that I would like to change over too in the winter! Do you have any pics of your carbed whipple set up? I would love to see it. I have a B&M 250 intercooled right now. Would love to switch over soon. Thanks

  9. #9
    al cole'holic
    HP350SC:
    Al'coleholic- your message box is full. ..sorry bout that, good to go now!!

  10. #10
    jackpunx
    JLaughreySS24:
    Jackpunx, Thats the same set up that I would like to change over too in the winter! Do you have any pics of your carbed whipple set up? I would love to see it. I have a B&M 250 intercooled right now. Would love to switch over soon. Thanks [img]http://www.***boat.com/image_center/data/500/943Stoker_blower_shot-med.jpg[/img]
    Thats the only one I have here.. Let me know if you have any other questions

Page 1 of 2 12 LastLast

Similar Threads

  1. Z-06 Pricing
    By PHOTOGLOU in forum Sandbar
    Replies: 3
    Last Post: 08-17-2005, 03:53 PM
  2. Used Whipple pricing...
    By Essex29 in forum Gear Heads
    Replies: 21
    Last Post: 04-19-2005, 07:28 AM
  3. Splitcase pricing.
    By dmontzsta in forum V-Drives
    Replies: 3
    Last Post: 08-01-2003, 09:56 AM
  4. Whipple special pricing
    By Whipple Charged in forum Gear Heads
    Replies: 8
    Last Post: 04-30-2003, 10:28 PM
  5. Whipple special pricing
    By Whipple Charged in forum Sandbar
    Replies: 14
    Last Post: 03-10-2003, 11:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •