Results 1 to 8 of 8

Thread: canfield alum heads

  1. #1
    Senior Member
    Join Date
    Feb 2009
    Posts
    1,820
    are they a good head i am looking at a set on
    ebay they are 310 runners. thanks
    pat(slotracer)

  2. #2
    GofastRacer
    Canfields are good, how much??, I like the Dart Pro's myself!.

  3. #3
    Senior Member
    Join Date
    Feb 2009
    Posts
    1,820
    $1600.00 for the set they say they are new.
    pat(slotracer)

  4. #4
    GofastRacer
    Nothing wrong with that if they are complete!..

  5. #5
    sanger mike
    pat, the canfields are good heads. if your going to spend the money take a look at the pro topline heads on ebay. your moving air now, and alot more fuel. you better check those gas tanks in the boat and see what size full pickup is in there 1/4 inch is not enough. you need to run 8 an all the way through alot of pepole make this mistake and run the motor lean, then they say the motor builder did somthing wrong and never realized the real problem. boat blower motors need alot of fuel because of the constant load on the motor. spend your money on the fuel system. look at KUHLS and BDS web sites there is alot of info to read.

  6. #6
    Liberator TJ1984
    I got a set of Pro-Topline 320's set up the way I wanted for $ 1850.00 shipped. from all Chevy Engines out of Whitney, Tx. and very pleased with them...Great flow #'s out of box also
    Gopherr

  7. #7
    sanger mike
    Liberator TJ1984:
    I got a set of Pro-Topline 320's set up the way I wanted for $ 1850.00 shipped. from all Chevy Engines out of Whitney, Tx. and very pleased with them...Great flow #'s out of box also
    Gopherr thats whats going on my new motor PRO-TOPLINE 320's. and your right liberator they do flow the big numbers. eek!

  8. #8
    Senior Member
    Join Date
    Feb 2009
    Posts
    1,820
    well i went and did it ordered a set of 310 canfields talked to the guy and told him what
    my set up was and he said the 350's would be to
    much that the 310's would work with my cam and
    blower set up. said they would be good to 800 h.p.
    but i am not looking to go that much. now on with
    the bottom end. eek!
    pat(slotracer)
    [ July 22, 2003, 04:37 PM: Message edited by: SLOTRACER ]

Similar Threads

  1. I Need help..Canfield heads w/ stud girdle probs.
    By poncho-pwr in forum Gear Heads
    Replies: 21
    Last Post: 07-28-2006, 06:13 PM
  2. Canfield Heads up
    By Fiat48 in forum Gear Heads
    Replies: 12
    Last Post: 04-25-2005, 12:58 PM
  3. Canfield or AFR Heads
    By 22Daytona in forum Gear Heads
    Replies: 14
    Last Post: 06-05-2003, 10:07 PM
  4. Alum. heads or steel heads?
    By racingrascal in forum Gear Heads
    Replies: 11
    Last Post: 08-11-2001, 01:27 PM
  5. alum. heads or steel heads?
    By racingrascal in forum Bench Racers
    Replies: 15
    Last Post: 07-02-2001, 07:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •